CONTROLS AND INDICATORS (CONTINUED)
%DEW (Red) Indicator
When power is on, this indicator flashes red to indicate excessive moisture buildup inside the VCP. The unit will not operate until it dries out sufficiently (the tape can be ejected from the unit). When DEW mode has been activated, leave the unit on to allow it to dry out completely.
^Stop/Eject Button
When pressed once, the tape is stopped. When pressed again the tape is ejected.
&Rewind/Review Button
If this button is pressed in the PLAYBACK mode, the VCP enters the reverse picture search mode. If pressed in STOP mode, the tape wiII rewind at high speed and the REW indicator will light orange.
*PLAY Button
Press this key to play back a recorded tape. In the playback mode, the playback indicator lights orange, and in Auto Tracking mode, this indicator will blink.
(Fast Forward/Cue Button
When this button is pressed during playback, the FF indicator lights orange and the VCP enters the forward picture search mode. When pressed during stop, the tape will fast forward at high speed.
)Tracking +/-
In the playback mode, this button allows the manual reduction of streaks which may appear on the picture during regular or slow motion playback. Reduces picture “jitter” during
Use these buttons to select AV1 and AV2 when the VCP is in any mode other than play. When VCP is in play mode, AV1 and AV2 are overridden by VCP playback and these buttons adjust tracking only.
1Auto Repeat Button
The VCP cycles through the following mode and the indicator lights orange. The tape will play to the end, rewind to the beginning and play again.
When this function is enabled, all control functions are disabled.
2AUDIO/VIDEO IN Jacks
Connect these jacks to the audio/video out jacks terminal of your Game machine or Camcorder using the RCA cord provided.
9
