Audiovox AX-2K4MSFL, AX-2K4S manual 128-6987 3 of

Models: AX-2K4MS AX-2K4 AX-2K4S AX-2K4MSFL

1 6
Download 6 pages 45.62 Kb
Page 3
Image 3
128-6987

channel 2. The siren will chirp 2 times and the dash mounted LED will Flash 2 times, indicating that the unit is ready to accept programming for channel # 2 which is only used for separate lock and unlock button transmitters, and is the disarm/unlock/unlock 2 and panic.

6)Press and hold the unlock symbol button of the transmitter you wish to program for 4 seconds or until a long chirp is heard from the siren.

"Repeat step 6 for each transmitter you wish to program".

7)Press and release the valet push button switch one time to ad- vance to channel 3. The siren will chirp 3 times and the dash mounted LED will Flash 3 times, indicating that the unit is ready to accept programming for channel # 3 which is the trunk re- lease/alternate output channel of the system.

8)Press and hold the trunk/key symbol button of the transmitter you

wish to program for 4 seconds or until a long chirp is heard from the siren.

"Repeat step 8 for each transmitter you wish to program".

9)Press and release the valet push button switch one time to advance to channel 4 if so equipped. The siren will chirp 4 times and the dash mounted LED will Flash 4 times, indicating that the unit is ready to accept programming for channel # 4, optional device (where equipped)

10)Press and hold the Option button of the transmitter you wish to program for 4 seconds or until a long chirp is heard from the siren.

"Repeat step 10 for each transmitter you wish to program".

11)Press and release the valet push button switch one time to ad- vance to channel 5 if so equipped. The siren will chirp 5 times and the dash mounted LED will Flash 5 times, indicating that the unit is ready to accept programming for channel # 5 optional device (where equipped)

12)Press and hold the second Option button of the transmitter you wish to program for 4 seconds or until a long chirp is heard from the

siren.

"Repeat step 12 for each transmitter you wish to program".

ERASING TRANSMITTERS IF THEY HAVE BEEN LOST OR STOLEN: NOTE: Before you begin to erase the lost or stolen transmitter(s), have all transmitters available that you wish to remain pro- grammed. These will be used during the program process

to identify transmitters that will continue to be used. Enter the transmitter program mode:

1.Turn the ignition switch to the “ON” position.

2.Within 10 seconds, press and release the valet/program switch three times. (Siren emits 1 short chirp indicating channel 1 has been entered)

3.Within 10 Seconds, press and hold the ARM or ARM/DISARM

3

128-6987

3 of 6

Page 3
Image 3
Audiovox AX-2K4MSFL, AX-2K4S manual 128-6987 3 of