Audiovox AXWD2002 owner manual For TVs with Component Video in Jacks

FOR TVs WITH COMPONENT VIDEO IN JACKS

Use a component video cable (commercially available) in place of the yellow video cable to enjoy higher qual- ity pictures.

The component video connection only supplies video (picture) in the DVD mode of the DVD/VCR. Therefore, in order to use the VCR features or view TV channels at the DVD/VCR, you still need to either connect the RF coax- ial cable between the ANT-OUT jack of the DVD/VCR and the TV’s Antenna In jack, or connect the yellow video cable as described earlier (Fig. 1). To connect the supplied RF coaxial cable, see “DVD/VCR TO TV CONNEC- TION” on page 14.

A/V-compatible

or wide screen TV

To COMPONENT VIDEO

INPUT jacks

To COMPONENT VIDEO

To Right (red) and Left (white)OUT jacks AUDIO INPUT jacks

To Right (red) and Left (white)

AUDIO OUTPUT jacks

		DVD/VCR	COMPONENT
		OUT
		IN	VIDEO OUT
ANT - IN	L		Y
		DVD/VCR
	AUDO	AUDIO OUT
					DIGITAL AUDIO OUT
	R	L	Cb	S-VIDEO
					PCM / BITSTREAM
				OUT
ANT - OUT					COAXIAL
CH3 CH4	VIDEO	R	Cr

[Fig. 3]

CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL

INPUT JACKS SUCH AS MD DECK OR DAT DECK

Use an audio coaxial digital cable (not included) for the audio connections.

Connecting to an amplifier equipped with digital input jacks such as MD Deck or DAT Deck.

Amplifier equipped with digital

input jacks, MD deck, DAT deck, etc.

	DVD/VCR		COMPONENT
	OUT
	IN		VIDEO OUT
ANT - IN	L		Y
		DVD/VCR
	AUDO	AUDIO OUT
				DIGITAL AUDIO OUT
	R	L	Cb S-VIDEO
			OUT PCM / BITSTREAM
ANT - OUT				COAXIAL
CH3 CH4	VIDEO	R	Cr

To COAXIAL DIGITAL

To COAXIAL DIGITAL AUDIO OUT jack

Notes

AUDIO INPUT jack

[Fig. 4]

¡The audio source on a disc in the 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck.

¡Be sure to turn off the power to all components in the system before connecting another component. ¡Refer to the Owner’s Manuals for the components to be connected to the DVD/VCR.

¡Set Dolby Digital and DTS to off for audio output in the setup mode. Playing a DVD disc using incorrect set- tings may generate noise distortion, and may also damage the speakers. (See page 36 to set Dolby Digital and DTS to on)

– 15 – EN

1L25