CONNECTING TO A DOLBY DIGITAL DECODER OR DTS DECODER
If using this DVD/VCR to play a DVD disc in 5.1 channel Dolby Digital surround, or DTS surround formats, the DVD/VCR outputs a Dolby Digital, or DTS data stream from its COAXIAL DIGITAL AUDIO OUT jack. By hooking the DVD/VCR up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic ambience with powerful and
Use an audio coaxial digital cable (not included) for the audio connections.
DVD/VCR
IN
ANT - IN
L
AUDO
R
ANT - OUT
CH3 CH4 | VIDEO |
OUT
COMPONENT
VIDEO OUT
DVD/VCR | Y |
|
AUDIO OUT |
|
|
L | Cb | DIGITAL AUDIO OUT |
| OUT | PCM / BITSTREAM |
|
| COAXIAL |
R | Cr |
|
Center speaker
Front speaker (left)
Dolby Digital,
DTS decoder
Surround
speaker (left)
Notes
Front speaker | To COAXIAL DIGITAL |
(right) | AUDIO OUT jack |
To COAXIAL DIGITAL | |
AUDIO INPUT jack | |
Surround | Subwoofer |
speaker |
|
(right) | [Fig. 5] |
| |
¡Be sure to turn off the power to all components in the system before connecting another component. ¡Refer to the Owner’s Manuals for the components to be connected to the DVD/VCR.
¡If the output is Dolby Digital audio, connect to a Dolby Digital decoder, and set Dolby Digital to on for audio output in the setup mode.
¡If the output is DTS audio, connect to a DTS decoder, and set DTS to ON for audio output in the setup mode. ¡Unless connected to a Dolby Digital decoder, or a DTS decoder, set Dolby Digital or DTS to off for audio out- put in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also
damage the speakers.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems Inc.
Manufactured under license from Dolby Laboratories. “Dolby” and the
CONNECTING TO AN ANALOG AUDIO
DVD/VCR
IN
ANT - IN
L
AUDO
R
ANT - OUT
CH3 CH4 | VIDEO |
OUT
COMPONENT
VIDEO OUT
DVD/VCR | Y |
|
AUDIO OUT |
|
|
L | Cb | DIGITAL AUDIO OUT |
| ||
| OUT PCM / BITSTREAM | |
|
| COAXIAL |
R | Cr |
|
Stereo system
To Right (red) and Left (white)
AUDIO OUT jacks
[Fig. 6]
To ANALOG AUDIO INPUT jacks
Notes
¡Be sure to turn off the power to all components in the system before connecting another component.
¡Refer to the Owner's Manuals for stereo systems and any other components to be connected to the DVD/VCR.
– 16 – | EN |
1L25
