Audiovox BP210 Wiring Your BP Speaker Box, Head Unit, Volt DC Input, Lighting Hook-UpFrom Rear

Wiring Your BP Speaker Box

The lighting elements of your Jensen products provide you with a unique custom touch to your vehicle. Jensen’s Red and Blue-Hue illumination allows great creative opportunities for the beginner and seasoned custom installer alike. The interior of your vehicle will never sound or look ordinary again. Let your imagination take you there.

The lighting features of all Jensen products require a 12 volt power source to operate. The polarity (+ and -) indicators for each set of inputs also appear on terminal cup.

Lighting Hook-Up From Rear

1.

Head Unit

+

12 volt switched + DC source

12 Volt DC

Input

–+

Do not connect amplifier or any audio source to Jensen- lighting inputs. Inputs are designed for switched 12-Volt DC power source only. Do not connect your Jensen product directly to your battery permanently, as it will cause your battery to discharge. Please use a switched 12 volt source. See fig. 1, (illustrates wiring diagram) be sure to maintain polarity. Be sure to connect to a constant switched 12 volt source. Correct connection would be the switched positive

(+)12 volt wire to the Positive (+) lighting input terminal and connect the negative (- ) lighting input terminal to a good chassis ground or negative (- ) ground wire.

Red/Blue

Lighting Switch

Chassis -

Ground

+

Jensen Lighting Input Terminals

Notice: There are no removable or serviceable parts on the speaker. Tampering with the speaker or any of it's components will damage the speaker and void the warranty.

NOTE: Must use 12 volt switched output ONLY.

Wiring Your Bandpass Speaker System

Connect the positive (+) wire from amplifier output to the positive terminal (red) on enclosure.

Connect the negative (-) wire from amplifier output to the negative terminal (black) on enclosure.