NEC LT260, LT240 user manual Connecting Your Video Equipment, Connecting Your DVD Player

INSTALLATION AND CONNECTIONS ￿ Making Connections

Connecting Your Video Equipment

Connecting Your DVD Player

RGB IN1 or IN2

Optional 15-pin-to-RCA (female)×3 cable (ADP-CV1)

Component video RCA×3 cable (not supplied)

Audio Equipment

AUDIO IN

L R

DVD player

AUDIO OUT
R	L

COMPONENT OUT

Audio cable (not supplied)

You can connect your projector to a DVD player with component output or Video output. To do so, simply:

1.Turn off the power to your projector and DVD player.

2.If your DVD player has the component video (Y,Cb,Cr) output, use a com- mercially available component video cable (RCA×3) and the optional 15-pin-to-RCA (female)×3 cable to connect your DVD player to the RGB

IN1 or IN2 connector on the projector.

For a DVD player without component video (Y,Cb,Cr) output, use com- mon RCA cables (not provided) to connect a composite VIDEO output of the DVD player to the Video Input of the projector.

3.Turn on the projector and DVD player.

NOTE: Refer to your DVD player's owner's manual for more information about

your DVD player's video output requirements,

E-33