NEC LT260, LT240 user manual To connect Scart output RGB

INSTALLATION AND CONNECTIONS ￿ Making Connections

To connect SCART output (RGB)

Before connections: An exclusive SCART adapter (ADP-SC1) and a com- mercially available SCART cable are required for this connection.

NOTE:

•Audio signal is not available for this connection.

•The RGB IN 2 connector does not support SCART signal and Plug & Play.

Video equipment such as DVD player

Projector

		To RGB IN 1
Commercially available SCART cable	Female	ADP-SC1

1.Turn off the power to the projector and your video equipment.

2.Use the NEC ADP-SC1 SCART adapter and a commercially available SCART cable to connect the RGB 1 input of your projector and a SCART output (RGB) of your video equipment.

3.Turn on the power to the projector and your video equipment.

4.Use the RGB 1 button on the remote control to select the RGB 1 input.

5.Press the MENU button on the remote control to display the menu.

6. From the Advanced menu, select [Projector Options] → [Setup] → [Page 3] → [Signal Select RGB1] → [Scart].

SCART is a standard European audio-visual connector for TVs, VCRs and DVD players. It is also referred to as Euro-connector.

NOTE: The ADP-SC1 SCART adapter is obtainable from your NEC dealer in

Europe. Contact your NEC dealer in Europe for more information.

E-29