USING ON-SCREEN MENU

Basic Menu Operation

Using the Menus

NOTE: The on-screen menu may not be displayed correctly while interlaced mo-

tion video image is projected.

1.Press the MENU button on the remote control or projector cabinet to display the Basic, Advanced or Custom Menu.

NOTE: When using a USB mouse, click the mouse button to display the menu. For other operations, do the same way as you use your PC mouse.

2.

Press the SELECT

buttons on the remote control or the projector

 

cabinet to highlight the menu for the item you want to adjust or set.

3.

Press the SELECT

button or the ENTER button on the remote control

 

or the projector cabinet to select a submenu or item.

4.

Adjust the level or turn the selected item on or off by using SELECT or

 

buttons on the remote control or the projector cabinet.

The on-screen slide bar will show you the amount of increase or decrease.

5.Changes are stored until you adjust it again.

ENTER ....... Stores the setting or adjustments.

CANCEL .... Return to the previous screen without storing settings or adjustments.

NOTE: You can close the main and sub menus simultaneously by pressing the PJ button on the remote control to cancel the Projector mode.

6.Repeat steps 2-5 to adjust an additional item, or press the CANCEL but- ton on the projector cabinet or the remote control to quit the menu dis- play.

E-73

Page 73
Image 73
NEC LT260, LT240 user manual Basic Menu Operation, Using the Menus