PROJECTING AN IMAGE
Setting the function switch
There are two switches on the bottom of the battery case: an applicable projector selector switch (1) and laser enable/dis- able switch (2). Check the projector be- ing used and decide whether to enable or disable laser, then set these switches as necessary using the tip of a thin ball- point pen. On this model, an applicable projector selector switch (1) is not used.
OFF ON
Switch (2)
On: Enabled (the laser lights when the LASER button is pressed) [Factory default]
Off: Disabled (the laser does not light even when the LASER button is pressed)
Disable the laser when using in an environment in which the unit is acces- sible to children.
