USING ON-SCREEN MENU ￿ Menu Descriptions & Functions

LAN

Selects a signal from a LAN card plugged into the projector's card slot.

Entry List

 

Displays the list of the entry signals. Use the SELECT

buttons on

your remote control or the projector cabinet to select the signal and press the ENTER button on the remote control or the projector cabinet to display the Entry Edit Command screen.

Using the Entry List

Making any ajustments to the current picture will automatically register its adjustments to the Entry List. The registered signal can be loaded any time from the Entry List.

NOTE: Up to 100 presets can be registered.

Entry Edit Command

You can edit signals on the Entry List.

Load: Enables you to select a signal from the list.

Store: Enables you to store the currently projected signal that currently projected.

Cut: Enables you to remove a selected signal from the list and place it on the "clipboard" in the projector.

Copy: Enables you to copy a selected signal from the list and place it on the "clipboard" in the projector.

Paste: Enables you to paste the signal placed on the "clipboard" to any other line of the list. To do this, select "Paste" and then select the line number you want to paste to. Last press ENTER.

Edit: Enables you to change source names or add source names to "More" in the Sorce Select.

Source Name: Enter a signal name. Up to 18 alphanumeric characters can be used.

E-83

Page 83
Image 83
NEC LT260, LT240 user manual Using the Entry List, Entry Edit Command