Lexmark Printer manual Where x y are the PageSize in points

4-19

PostScript

•If the requested media size is not found by the previous search, the following search order is used:

–Tray 1

–Tray 2

–Tray 3

–Multipurpose Feeder

–Tray 4

–Tray 5

•If the requested size cannot be located in any automatic source, a configurationerror is issued and the job is flushed.

For printers that support automatic duplexing:

•Automatic duplexing is not supported for custom-size paper or for envelopes in the multipurpose feeder. Automatic duplexing is supported from the multipurpose feeder for all other papers.

•If the paper source is changed before the back side of a duplexed page prints, a blank back page prints, the paper source changes, and the information for the back side of the page is printed on the front side of a page sent from the new paper source.

When these operators are used, it is equivalent to executing the following PostScript emulation sequence:

<</PageSize [x y] /ImagingBBox null /Policies << /PageSize 0>> >> setpagedevice

where x y are the PageSize in points.