Lexmark Printer manual Vertical Cursor Position in Rows, Vertical Cursor Position in Decipoints

2-69 PCL

Table 2-32: Cursor Positioning (Continued)

Command / Parameters		Function / Result
ESC&a#R		Vertical Cursor Position (in Rows)
# = number of Rows1		Moves the cursor to a new position along the vertical axis.
		Note: Row height is determined by either the Vertical Motion Index
		(VMI) or the Set Line Spacing Command.
ESC&a#V		Vertical Cursor Position (in Decipoints)
# = number of Decipoints1		Moves the cursor to a new position along the vertical axis.
(1 Decipoint = 1/720 inch)
ESC*p#Y		Vertical Cursor Position (in PCL Units)
# = number of PCL Units1		Moves the cursor to a new position along the vertical axis.
		Note: PCL units are set by the Unit-of-Measure Command.
ESC=		Half Line-Feed
		Moves the cursor down 1/2 line (1/2 of the current VMI).
ESC&k#G		Set Line Termination
0	CR=CR, LF=LF, FF=FF (Default)	Controls how the printer responds to the Carriage Return (CR), Line
1	CR=CR+LF, LF=LF, FF=FF	Feed (LF), and Form Feed (FF) control codes.
2	CR=CR, LF=CR+LF, FF=CR+FF
3	CR=CR+LF, LF=CR+LF, FF=CR+FF
ESC&f#S		Push / Pop Cursor Position
0	Push	Sets up a cursor position stack for storing and recalling various cursor
1	Pop	positions. The stack can store up to 20 cursor positions.

1 Parameter preceded by + or – sign denotes a relative cursor move from the current cursor position. Parameter without a sign denotes an absolute cursor move from the top left margin.