Lexmark Printer manual Standard PCL Emulation Fonts

2-38 PCL

on page 2-43to select a symbol set. If a symbol set does not have a PJL value, use the symbol set ID to select the symbol set. A font selection can be either temporary or set as the default.

Use the following PJL commands to select fonts: FONTSOURCE, FONTNUMBER,

PITCH, PTSIZE, SYMSET, SET, DEFAULT. See “Table 3-5: Common Variables for

PCL Emulation” on page 3-48for more information about these commands.

Forward and Backward Compatibility Modes for the

Lexmark E234(n), E330, and E332n

Your PCL emulation has forward and backward compatibility modes. The forward compatibility mode is used to emulate the fonts in the Hewlett-Packard Company’s LaserJet 4050. The backward compatibility mode is used for compatibility with the Hewlett-Packard Company’s LaserJet 5 and the Lexmark family of printers.

Standard PCL Emulation Fonts

The following table lists the font selection commands for forward and backward compatibility mode for each of the 47standard PCL emulation fonts. Since the font selection commands for the forward and backward compatibility modes are identical, they are listed together in the table.

Table 2-20: Forward and Backward Compatibility Font Selection Commands

	Forward and Backward Compatibility Mode
Standard PCL Emulation Font Name	Spacing	Style	Weight	Typeface
Courier	0	0	0	4099
Courier Italic	0	1	0	4099
Courier Bold	0	0	3	4099
Courier Bold Italic	0	1	3	4099
CG Times	1	0	0	4101
CG Times Italic	1	1	0	4101
CG Times Bold	1	0	3	4101
CG Times Bold Italic	1	1	3	4101
Univers Medium	1	0	0	4148
Univers Medium Italic	1	1	0	4148
Univers Bold	1	0	3	4148

1 This font is not implemented in the Hewlett-Packard Company’s LaserJet 4050.