Lexmark manual Printer Unique Variables for Both Printer Languages

3-19 PJL

Table 3-3: Common Variables for Both Printer Languages (Continued)

Variable	Function	Selections	Factory Default
USERNAME	Print and Hold	“username”	NULL
(SET only)	Username	username is a text string truncated to 24 characters.	(No username)
		Note: A null (“ “) string is an acceptable value and
		indicates no Print and Hold Username is specified.
WIDEA4	A4 width	NO, YES	NO
		NO indicates the A4 width is 198 mm.
		YES indicates the A4 width is 203 mm.

Printer Unique Variables for Both Printer Languages

The following variables are unique to some Lexmark printers and are supported for both PCL emulation and PostScript emulation. Therefore, the [command modifier:value] parameter should not be specified.

To determine which variables your printer supports, see “Table B-2: Printer Unique

PJL Variables for Both Printer Languages” on page B-3.

Table 3-4: Printer Unique Variables for Both Printer Languages

Variable	Function	Selections	Factory Default
LACTIVEBINRESET	Active Bin	MANUAL, AUTOMATIC	MANUAL
(DEFAULT only)	Reset
LADVANCEDSTATUS	Advanced	ON, OFF	ON
(DEFAULT only)	Status	ON enables parallel bidirectional support.
(Port specific)		OFF disables parallel bidirectional support.
LALARMCONTROL	Alarm Control	OFF, SINGLE, CONTINUOUS	SINGLE
(DEFAULT only)
LAUTOCRLF	Auto CR after	ON, OFF	OFF
	LF
LAUTOLFCR	Auto LF after	ON, OFF	OFF
	CR
LBLANKPAGES	Blank Pages	DONOTPRINT, PRINT	DONOTPRINT
		Note: Some printers have a fixed value of
		DONOTPRINT.
LBONDLENGTH	Bond Length	NORMAL, SHORT	NORMAL
(DEFAULT only)
LBONDLOADING	Bond Paper	OFF, DUPLEX	OFF
(DEFAULT only)	Loading