Lexmark Printer manual Set Universal Feed Direction, Set Universal Custom Name, Select Orientation

2-65 PCL

Table 2-30: Page Control (Continued)

Command / Parameters		Function / Result
ESC&f#O		Set Universal Feed Direction
0	Short-edge	Sets the feed direction of Universal size. Feed direction means which
1	Long-edge	side of the print media, either the short edge or the long edge, feeds
		first through the printer first.
ESC&f#W [custom name]		Set Universal Custom Name
# = number of bytes in the custom name		Sets the user-specified custom name for the Universal paper size
		being used.
ESC&l#O		Select Orientation
0	Portrait (Default)	Specifies the position of the logical page with respect to the physical
1	Landscape	page.
2	Reverse Portrait	Note: Resets margins, number of printable lines per page, and cursor
3	Reverse Landscape
		position.
ESC&a#P		Print Direction
# = Degrees (0, 90, 180, 270)		Rotates coordinate system counter-clockwise in 90° increments with
Default = 0		respect to current orientation.
		Note: Margins are not rotated or cleared.
ESC&c#T		Character Text Path Direction
0	Horizontal Printing	Vertically rotates text for use in vertical writing, such as printing
-1	Vertical Rotated Printing	Japanese text.
ESC&a#L		Set Left Margin
# = Column		Sets left margin to left edge of the designated column.
Default = 0		Note: The column width is defined by the space character of the active
		font and the Horizontal Motion Index (HMI).
ESC&a#M		Set Right Margin
# = Column		Sets right margin to right edge of the designated column.
Default = Logical Page Width		Note: The column width is defined by the space character of the active
		font and the HMI.
ESC9		Clear Horizontal Margins
		Clears left and right margins.
ESC&l#E		Set Top Margin
# = number of Lines		Sets the number of lines between the top of the physical page and first
Default = 3 (1/2 inch)		line of print. Line height is determined by the current Vertical Motion
		Index (VMI) and/or line spacing value.
		Note: Setting a top margin of 0 results in the first line of text falling
		outside of the printable area.
ESC&l1T		Job Separation
		This command is parsed and ignored.