Lexmark Printer Select Stroke Weight, Select Typeface, Select Font by Font ID, Underline Disable

2-71 PCL

Table 2-33: Font Selection (Continued)

Command / Parameters		Function / Result
ESC(s#B (primary)		Select Stroke Weight
ESC)s#B (secondary)		Selects a font with a particular thickness.
-7	Ultra Thin	Note: This command will not alter the stroke weight of an available font.
-6	Extra Thin
-5	Thin
-4	Extra Light
-3	Light
-2	Demi Light
-1	Semi Light
0	Medium (Default)
1	Semi Bold
2	Demi Bold
3	Bold
4	Extra Bold
5	Black
6	Extra Black
7	Ultra Black
ESC(s#T (primary)		Select Typeface
ESC)s#T (secondary)		Selects the best fit font design.
# Typeface identifier (0 - 65535)		To obtain the typeface values for downloaded fonts, print the font list from
		the printer operator panel or through MarkVision Professional. Refer to
Note: For a list of typeface numbers, see		your printer user documentation for more information.
Table 2-4 on page 2-10and Table 2-9 on		On the printout, the typeface number is the last number on the font
page 2-20.
		selection command example line. The example line is below the name of
		the font. In the following example, the typeface number is underlined:
		RO Courier
		<<ESC>>(<<symset>><<ESC>>(s0p<<pitch>>h0s0b4099T
ESC(#X (primary)		Select Font by Font ID
ESC)#X (secondary)		Selects the font by the identification number.
# = Font ID (0 - 32767)
ESC(3@ (primary)		Select Default Font
ESC)3@ (secondary)		Sets all font selection characteristics to the Default Font.
ESC&p#X[data]		Transparent Print Data
# = number of data of bytes to print as text		Prints the next number of bytes as text.
ESC&d#D		Select Underline Type (Enable)
0,1	Fixed	Notes:
2	Fixed - double	• Fixed underline is drawn 5 pels below cursor position.
3	Floating	• Floating underline position is determined by all the positions of the
4	Floating - double	characters with descenders in the fonts that are to be underlined.
		• Underline thickness is 1/100 inch.
ESC&d@		Underline - Disable