Lexmark Printer manual PostScript Emulation System Parameters

4-79

PostScript

System Parameters

The setsystemparams operator sets the values of the specified system parameters. This operator requires a password if one is set. The currentsystemparams operator returns a dictionary of the current values of the system parameters.

Values supplied to setsystemparams that are outside the range or limits for the specified integer parameter do not cause rangecheck or limitcheck errors. An appropriate value is used. For example, if you set JobTimeout to 14, it is actually set to 15, and no error is generated. The exceptions are noted in Table 4-16.

Values supplied to setsystemparams that do not match the type of the specified parameter cause typecheck errors. Parameters that are not supported by the printer are ignored. An attempt to change the value of a read-only parameter has no effect on the parameter. Write-only parameters are not returned by currentsystemparams.

To determine which parameters your printer supports, see Table C-4 on page C-9.

Table 4-16: PostScript Emulation System Parameters

Key	Type	Definition
BuildTime	integer	(Read-only) Timestamp identifying the specific build of the
		PostScript emulation interpreter.
ByteOrder	boolean	(Read-only) Native (preferred) order of multiple-byte numbers
		in binary encoded tokens.
		False	high-order first
		True	low-order first
CurDisplayList	integer	(Read-only) This value is always zero.
CurFontCache	integer	(Read-only) Bytes currently occupied by the font cache.
CurFormCache	integer	(Read-only) Bytes currently occupied by the form cache.

1 These parameters are Lexmark-specific and are in addition to the Adobe PostScript Language Supplement 2016. 2 These parameters are available with the Adobe PostScript Language Supplement 3010.

3 These parameters are Lexmark-specific and are in addition to the Adobe PostScript Language Supplement 3010.