Lexmark Printer manual PostScript

4-90

PostScript

Table 4-17: PostScript Emulation Device Parameters (Continued)

Key	Type	Definition
PCLSmartSwitch	boolean	Supported values are:
		True	PCL SmartSwitch is On.
		False	PCL SmartSwitch is Off.
		For more information, see “Using SmartSwitch” on page 2-1.
PortLocation	string	(Read-only) Designates the physical location of the port related to the parameter set.
		Supported values are:
		Standard Port
		Option Slot 1
		Option Slot 2
		Option Slot 3
PSSmartSwitch	boolean	Supported values are:
		True	PS SmartSwitch is On.
		False	PS SmartSwitch is Off.
		For more information, see “Using SmartSwitch” on page 4-1.
Type	name	(Read-only) Always returns the value of /Communications.

Device Parameters for the Communication Device %EtherTalk%, %EtherTalkA%, %EtherTalkB%, %EtherTalkC%, %EtherTalkD%

(%EtherTalk_NV% and %EtherTalk_Pending% contain the same parameters)

DelayedOutputClose	boolean	Selects how the printer manages the port at the end of each print job. Supported values are:
		True	An end-of-file message is not sent until the current job and all preceding jobs
			finish printing.
		False	An end-of-file message is sent as soon as a job finishes executing in the
			interpreter, whether or not that job has finished printing.
		This value is set independently for each port.
Enabled	boolean	(Read-only)
		Supported values are:
		True
		False
EthernetAddress	string	(Read only) The Ethernet address of the Ethernet internal print server.
		Legal value: Any string of 17 or fewer non-null characters.
EtherTalkType	string	The “type” of the EtherTalk interface entity name. This parameter also sets the
		LocalTalkType parameter to the same value. The new value is returned by the
		appletalktype compatibility operator.
		Legal value: Any string of 32 or fewer non-null characters. Default value is LaserWriter.
		Note: Setting this variable does not affect the value for other physical internal print servers.
		The statusdict string appletalktype is correct for the current job port.
EtherTalkZone	string	The “zone” of the EtherTalk interface entity name.
		EtherTalkZone is read/write only to RAM. There is no NVRAM variable for EtherTalkZone.
		Legal value: Any string of 32 or fewer non-null characters.