Lexmark Printer Lfax Phonenumber Command, Lfax Phonenumber number Values, Character Description

3-85 PJL

LFAX PHONENUMBER Command

This command tells the printer that the output resulting from the current job is being sent to the fax processing device instead of to the printer. The current job is printed and is not sent to the fax processing device if one of the following occurs:

•The printer is not configured for fax send capability

•The command is received with a command that selects an interpreter that does not support formatting functionality for sending faxes

Syntax:

@PJL LFAX PHONENUMBER=“number” [STATIONID=“station name”][<CR>]<LF>

PHONENUMBER=“number”

The PHONENUMBER parameter is a text string up to 60 characters long. If an unsupported character is supplied in the PHONENUMBER parameter, the entire LFAX PHONENUMBER command is ignored.

Table 3-21: LFAX PHONENUMBER “number” Values

Character	Description
0 - 9	DTMF1 digits 0 to 9
*	DTMF1 character *
#	DTMF1 character #
A - D	DTMF1 characters A, B, C, and D
!	Flash
W	Wait for dial tone
@	Wait for silence
&	Wait for credit card tone
, (comma)	Pause
^	Toggles between tone and pulse modes

1 DTMF, Dual Tone Multi-Frequency, is the system used by touch-tone telephones which assigns a specific frequency, or tone, to each key so it can easily be identified by a microprocessor.

[STATIONID=“station name”]

The STATIONID parameter specifies a station name that is sent to the receiving fax machine to indicate the origin of an incoming fax. The “station name” is a text string which is truncated to 20 characters. A null value (“ “) indicates no station ID is specified. If no station name is specified, the default station name of the printer is used.