Lexmark Printer Set Line Spacing Alternative Method, Duplex Page Side Selection, Set Page Length

2-67 PCL

Table 2-30: Page Control (Continued)

Command / Parameters		Function / Result
ESC&l#D		Set Line Spacing (Alternative Method)
1	1 line/inch	Specifies VMI in lines per inch.
2	2 lines/inch	Notes:
3	3 lines/inch
		• For some printers, you can change the default VMI from the printer
4	4 lines/inch
		operator panel or through MarkVision Professional by using the
6	6 lines/inch (Default)
		Lines Per Page menu item. Refer to your printer user documentation
8	8 lines/inch
		for more information.
12	12 lines/inch
		• Unsupported values are ignored.
16	16 lines/inch
		• Use of this command alters any earlier VMI setting.
24	24 lines/inch
48	48 lines/inch
ESC&a#G		Duplex Page Side Selection
0	Next Side	Specifies which physical page side to print next when duplex printing.
1	Front Side	Note: When the duplex option is not installed, this command causes a
2	Back Side
		conditional page eject.
ESC&l#P		Set Page Length
# = number from 0 to 14		Sets the logical page length in number of lines.
0 = default page length is used		Notes:
(1 to 14 new page length is set)
		• This command is sent at the beginning of a page in a print job and
		prior to any printable data.
		• When the command is sent, the current page is closed and printed.
		• Unsupported values are ignored.
ESC&k#W		Text Scale Mode
5	Turn Text Scale Mode OFF	Allows 66 lines of text at six lines per inch to print on an effective page
6	Turn Text Scale Mode ON	length of 10 1/2 inches.
		Notes:
		• Unsupported values are ignored.
		• The command is ignored when the printer is in landscape mode.