Lexmark Printer manual Values for devicefilename.filetype are Device

3-10 PJL

•LRESOURCE:"device:filename.filetype" is required for LRESOURCE

variables. (See “Table 3-9: Printer Unique LRESOURCE Variables” on page 3-53.)

Values for "device:filename.filetype" are:

device flash, flash1, disk, or disk1 (case insensitive)

filename A unique identifier for a file, such as the macro ID for a PCL macro, the symbol set ID for a PCL symbol set, the font ID for a PCL font, and so on. The filename is case sensitive.

filetype An identifier that categorizes the file, such as p5macro for PCL macros or p5symset for PCL symbol sets. See the table beginning on page 3-87for a complete list of the supported file types. The filetype is case sensitive.

variable=value

The supported variables and values are listed in the tables beginning on page 3-12.

Note: Variables may be modified by the DEFAULT command, except those marked

Read Only. Some variables may only be modified using the PJL SET command. These variables cannot be modified using the DEFAULT command. They are marked Set Only.