Lexmark Printer manual Information on PageSize, see

4-64

PostScript

Table 4-14: Page Device Parameters (Continued)

Key	Type	Definition
DeviceRenderingInfo	dictionary	AutoMediaType is a boolean that controls the MediaType entries in the
(continued)		InputAttributes dictionary in the pagedevice dictionary.
		True	MediaType entries in the InputAttributes dictionaries cannot be
			modified by the user. The values are confined to values known by
			the printer operating system.
		False	MediaType entries in the InputAttributes dictionaries can be
			modified by the user.
		EdgeToEdge is a boolean which determines if there should be an unprintable
		area on the page.
		True	Print to the edge of the paper.
		False	Do not print to the edge of the paper (default).
		DefaultPoliciesPageSize is an integer which equals the PageSize parameter in
		the Policies dictionary unless PageSize is set to 23; in that case,
		DefaultPoliciesPageSize equals the PageSize parameter value before it was set
		to 23 or equals 0 if the PageSize parameter is initialized to 23. For more
		information on PageSize, see page 4-72.
		SubstituteSize allows for the substitution of A4- and Letter-size print materials,
		and A3- and 11x17 inch-size print materials for each other when one size is not
		installed.
		Note: For size substitution to occur, the substituted print material and the
		requested print material must be of the same paper type.
		The following values are supported:
		/Off		No size substitution is performed.
		/A4-Letter		If A4 is requested but not installed and Letter is installed, Letter
				is substituted for A4. Or, if Letter is requested but not installed
				and A4 is installed, A4 is substituted for Letter.
		/A3-11x17		If A3 is requested but not installed and 11x17 is installed,
				11x17 is substituted for A3. Or, if 11x17 is requested but not
				installed and A3 is installed, A3 is substituted for 11x17.
		/All		Both size substitutions are permitted.
		Note: When the size substitution occurs, the page is scaled to the size of the
		requested print material.
		The DefaultPoliciesPageSize value is used as the effective policy when:
		• The SubstituteSize parameter is not set to /Off and a size substitution cannot
		be performed.
		• The PageSize parameter in the Policies dictionary is set to 23.
		Notes:
		• If SubstituteSize is set to /Off, the effective policy is the value of PageSize.
		• If SubstituteSize is not set to /Off and a size substitution is possible, the
		effective policy is 3.