Lexmark Printer manual SlipSheetDetails Dictionary

4-74

PostScript

Table 4-14: Page Device Parameters (Continued)

Key	Type	Definition
SlipSheetDetails	dictionary	Specifies the following two unique separator sheet parameters: SlipSheetSource
		and Type.
		SlipSheetSource is an integer type parameter which identifies the source used for
		separator sheets. Supported values are:
		Null	Use current source (default)
		0	Tray 1
		1	Tray 2
		2	Envelope Feeder
		3	Tray 3
		4	Multipurpose feeder
		5	Tray 4
		6	Tray 5
		The key is found in the DeviceRenderingInfo dictionary within pagedevice. It can
		be altered using a setpagedevice operator.
		/SlipSheetDetails << /Type 96
		/SlipSheetSource n>> >> setpagedevice
		Type is a constant value. To find the value of Type for your printer, see Table C-2
		on page C-4.
Staple	integer	Specifies whether to staple the current print job.
		Supported values are:
		0	Do not staple print job.
		1	Staple each set in the front position.
		2	Staple each set in the rear position.
		3	Staple each set according to the Auto setting.
		4	Staple each set in the dual position.
		The format for setting the Staple key is:
		<</Staple n>> setpagedevice
TraySwitch	boolean	Indicates tray linking is always active. When the media in one input source is
		depleted, other input sources are searched to determine if the same media can
		be found in another source. If another source is found, the alternate source is
		selected. The media in both input sources must be the same size and type for
		tray linking to occur.