Lexmark Printer manual Interfaces

11

12

7

8

The Communications Port Properties screen for this specific port displays. For example, if you select the COM1 port, then the Communications Port [COM1] Properties screen displays.

9 Select the Port Settings tab.

10 Fill out the fields for the following printer settings to make them match your printer settings:

Scroll down to Ports and click the + once to expand the list of available Ports. Select the communications port you want to configure and double-click.

Double-click the System icon. The System Properties screen displays.

Click Control Panel. The Control Panel screen displays.

1

2

3

4

5

6 In the Device Manager area of the Hardware tab screen, click the Device Manager button. The Device Manager screen displays.

Setting Up the Communications Port Using Windows 2000

In your Windows 2000 application:

Select the Hardware tab.

Click Settings.

On the Menu bar, click Start.

8-4

Interfaces

•

•

•

•

•

Bits per second

Data bits

Parity

Stop bits

Flow Control

Note: For Flow Control, select Hardware if you want DTR protocol or Xon/ Xoff for Xon/Xoff protocol.

Click OK.

Close all windows now that the port is set up.