Lexmark Printer manual Unlocking a Protected File or Device for the Current Job

3-97 PJL

Unlocking a Protected File or Device for the Current Job

The file or device unlocked by the execution of this command is automatically re-locked upon execution of the EOJ command or by a printer language change.

Syntax:

@PJL LDECLARE LRESOURCE : "device:filename.filetype"

LRWLOCKJ = "password"[<CR>]<LF>

@PJL LDECLARE LRESOURCE : "device:filename.filetype"

LWLOCKJ = "password"[<CR>]<LF>

LRESOURCE : "device:filename.filetype"

Values for "device:filename.filetype" are:

device flash, flash1, disk, or disk1 (case insensitive)

filename A unique identifier for a file, such as the macro ID for a PCL macro, the symbol set ID for a PCL symbol set, the font ID for a PCL font, or the actual file name for data, Type 1 fonts, and demo files as shown on the Directory. The filename is case sensitive.

filetype An identifier that categorizes the file, such as p5macro for PCL macros or p5symset for PCL symbol sets. See the table beginning on page 3-87for a complete list of the supported file types. The filetype is case sensitive.

LRWLOCK = "password" or LWLOCK = "password" Parameters

See “Printer Unique LRESOURCE Variables” on page 3-52 for information about values for LRWLOCK = "password" and LWLOCK = "password" parameters.