Common Variables for Both Printer Languages | Lexmark guide

	3-12	PJL

Common Variables for Both Printer Languages

Note: The word common applies to those variables common to both your printer and the Hewlett-Packard Company’s LaserJet printers.

The following common variables are supported for both PCL emulation and PostScript emulation, unless otherwise noted. Therefore, the [command modifier:value] parameter should not be specified.

To determine which variables your printer supports, see “Table B-1: Common

Variables for Both Printer Languages” on page B-1.

Table 3-3: Common Variables for Both Printer Languages

Variable	Function	Selections	Factory Default
AUTOCONT	Auto Continue	0, 5 to 255, OFF, ON	0
(DEFAULT only)		A value of 0 or OFF indicates Auto Continue is
		disabled. A value of ON indicates Auto Continue is set
		to 30.
		INQUIRE or DINQUIRE on the Auto Continue variable
		returns a numeric value.
		Note: If a value greater than 255 is specified by a SET
		or DEFAULT command, the value is changed to 255.

BINDING	Duplex Bind	LONGEDGE, SHORTEDGE	LONGEDGE

BITSPERPIXEL	Image	1, 2, 4, Auto	1
	Enhancement	A value of 1 indicates the Image Enhancement
	Technology and	A value of 1 indicates the Image Enhancement
	Technology and	Technology setting is set to Off. A value of 2 or 4
	Image	Technology setting is set to Off. A value of 2 or 4
	Image	indicates the Image Enhancement Technology setting
	Enhancement	indicates the Image Enhancement Technology setting
	Enhancement	is set to On.
	Technology Type	is set to On.
	Technology Type	INQUIRE or DINQUIRE returns the value of Image
		INQUIRE or DINQUIRE returns the value of Image
		Enhancement Technology as follows:
		• If Image Enhancement Technology is set to Off, 1 is
		returned.
		• If Image Enhancement Technology is set to On, 2 or
		4 is returned depending on the Image
		Enhancement Technology Type setting. If Image
		Enhancement Technology Type is set to On, the
		numerical value of BITSPERPIXEL is returned. If
		Image Enhancement Technology Type is set to
		Auto, a value of 2 or 4 is returned depending on the
		amount of total memory installed.

CLEARABLEWARNINGS	Auto Continue	JOB, ON	ON
(READ only)	from operator	If Auto Continue is set to On, JOB is returned.
(READ only)	panel non-fatal	If Auto Continue is set to On, JOB is returned.
	panel non-fatal	If Auto Continue is set to Off, ON is returned.
	warning messages	If Auto Continue is set to Off, ON is returned.

COPIES	Number of copies	1 to 999	1
	of each page	Note: If a value greater than 999 is specified by a SET
		Note: If a value greater than 999 is specified by a SET
		or DEFAULT command, the value is changed to 999.

Image 119

Lexmark manual Common Variables for Both Printer Languages, Variable Function Selections Factory Default

Contents

August Technical Reference Edition August Contents TOC-2 TOC-3 TOC-4 Printer Specifications PostScript Support TOC-5 Overview Introduction Technical Reference Documentation Available in Hard Copy PCL Emulation Printer Specifications Printing the File Navigational Tips Bibliography Selecting PCL Emulation Using SmartSwitchUsing the Operator Panel or MarkVision Professional Using Your Software Program Printable Areas Formatting Envelope Lexmark C510n Paper and Envelope DimensionsLexmark C510n Paper Lexmark Lexmark X422 Paper and Envelope Dimensions Application Lexmark E230, E232, E234n, E330, E332n PCL Print Area Menu Item Edge Font and Symbol Set Support for the Lexmark Forward and Backward Compatibility Modes for the Lexmark Forward and Backward Compatibility Font Selection Commands Forward and Backward Compatibility Font Selection OCR-B1 OCR-A1 Type 1 Fonts PCL Symbol Font Group Symbol Set PJL Value Set ID Selecting Symbol Sets for the LexmarkSymbol Set Support for PCL Emulation Text Fonts Mspubl PsmathMATH8 Pifont Symbol Symbol Set Set ID Fonts Non-Text PCL Emulation Symbol Sets ISO 6 Ascii ISO PCL Emulation Symbol SetsSymbol Set ID OCR-A OCR-B Font and Symbol Set Support for the Lexmark C510n Courier 4099 Courier Italic Courier Bold Forward and Backward Compatibility Font Selection OCR-A1 Type 1 Fonts PCL 11 Symbol Set Support for PCL Emulation Text Fonts Selecting Symbol Sets for the Lexmark C510n Psmath 12 Non-Text PCL Emulation Symbol Sets 13 ISO PCL Emulation Symbol Sets Font and Symbol Set Support for the Lexmark E230, E232 Standard PCL Emulation Fonts Forward and Backward Compatibility Mode Specialty PCL Fonts PC850 PC858 Selecting Symbol Sets for Lexmark E230, E23216 PCL Emulation Symbol Sets Latin Postnet Barcode C39 Narrow C39 Regular C39 Wide WINL5 ISOL5 PC8TK PC852 15U 15Y 109Y 209Y 19M 579L 10L 14L 18 PCL Emulation Symbol Sets SpecialsTypeface / Symbol Set PJL Value Symbol Set ID Symbol Set ID Symbol Set / Typeface 19 ISO PCL Emulation Symbol Sets PCL Standard PCL Emulation Fonts PCL Postnet Barcode Wingdings 31402 Symbol 16686 PCL Specialty PCL Fonts 23 PCL Emulation Symbol Sets Latin Selecting Symbol Sets for the Lexmark E234n, E330, and E332n PCL PCL PCL Wingdings Symbol SymbolPS ITC Zapf Dingbats 19L 26U 10N 10R 12R 13R 14R 12N 11G 10G 12G 14G Symbol Set ID 17U 24Q 27Q 16U 18U WINL2 ISOL2 PCL PCL OCR-A OCR-B Symbol Set ID 15U 15Y 109Y 209Y 19M 579L 10L 14L 25 PCL Emulation Symbol Sets Specials PCL PCL PCL C39 Narrow C39 Regular C39 Wide 26 ISO PCL Emulation Symbol Sets 27 Control Codes Command StructureCommands Control Codes Element Description Command StructureCommand Parameters 28 Description of Command Structure Linking Commands 29 Job Control PCL Emulation CommandsPCL Emulation Commands by Function Command / Parameters Function / Result Universal Exit Language UEL / Start of PJL Unit of Measure 30 Page Control Print Direction Set Universal Feed DirectionSet Universal Custom Name Select Orientation Set Horizontal Motion Index HMI Set Text LengthSet Output Bin Skip Perforation Set Page Length Text Scale ModeSet Line Spacing Alternative Method Duplex Page Side Selection 32 Cursor Positioning 31 Alphanumeric ID Half Line-Feed Vertical Cursor Position in RowsVertical Cursor Position in Decipoints Vertical Cursor Position in PCL Units 33 Font Selection Underline Disable Select Stroke WeightSelect Default Font Select Underline Type Enable 34 User-Defined Symbol Set 36 Macros 35 Font Creation 37 Print Model 39 Rectangular Area Fill Graphics 38 User-Defined Pattern Fill Rectangular Area 40 Raster Graphics End Raster Graphics Version C Set Raster Compression ModeTransfer Raster Data by Row/Block End Raster Graphics Version B Data Set Raster ConfigurationRaster Height Destination 41 Color Extensions Color Component One Configure Image DataGamma Correction Render Algorithm 42 Status Readback 43 Picture Frame 44 Miscellaneous Commands Command / Parameter Command Name GL/2 Commands45 Configuration Group 47 Polygon Group 46 Vector Group 48 Character Group 49 Line and Fill Attributes Group Parameters Raster Compression ModeRaster Image Graphics Syntax Example Uncoded Data Tagged Image File Format Run-Length Encoded Data Delta Row 50 Adaptive Compression Control Strings Scan Mode CountH,CountL DataAdaptive Compression Group 3 and Group 4 Raster Compression Zlib Additional Compression Modes Macros ESC PJL Command NotationPJL Command Notation Character Code Description Hex Code Decimal Code Universal Exit Language Command Kernel Commands Comment Command Enter Language Command JOB Command Job Separation Commands Start = first Parameter EOJ Command Categories Environment Commands and VariablesEnvironment Variable Categories Beginning Default Command SET Command Values for devicefilename.filetype are Device Reset Command Initialize Command Common Variables for Both Printer Languages Variable Function Selections Factory DefaultCommon Variables for Both Printer Languages Duplex CplockON, OFF Density INTRAY2 HoldtypePUBLIC, Private Public Imageadapt DANISH, GERMAN, ENGLISH, SPANISH, French JoboffsetON, OFF, BETWEENJOBS, Betweencopies Lang Dinquire or Output Bin setting Inquire value SLOW, Fast PasswordPowersave Parallel QTY PowersavetimeON, OFF, Auto Resolution Timeout Printer Unique Variables for Both Printer Languages Printer Unique Variables for Both Printer Languages Assign Type/Bin Dinquire or Bond setting Inquire value Lcardstocktexture OPTIONALOUTBIN2, OPTIONALOUTBIN3 DisabledLcardstockweight Lcardstockoutbin Lcoloredtexture LcoloredweightLcoloredloading Lcoloredoutbin LCUSTOMTYPE1LENGTH LcustompaperheightLcustompaperfeed SHORTEDGE, Longedge Shortedge LCUSTOMTYPE2LENGTH LCUSTOMTYPE1WEIGHTLCUSTOMTYPE1OUTBIN LCUSTOMTYPE1TEXTURE LCUSTOMTYPE2OUTBIN LCUSTOMTYPE2WEIGHTLCUSTOMTYPE2NAME CUSTOMTYPE2 CUSTOMTYPE3 LCUSTOMTYPE3WEIGHTLCUSTOMTYPE3MEDIA LABELS, CARDSTOCK, Envelope Cottonpaper LCUSTOMTYPE3NAME LABELS, CARDSTOCK, Envelope Cottonpaper LCUSTOMTYPE4NAME LCUSTOMTYPE4WEIGHTLCUSTOMTYPE4LOADING LCUSTOMTYPE4MEDIA LABELS, CARDSTOCK, Envelope Cottonpaper LCUSTOMTYPE5NAME LCUSTOMTYPE5LENGTHLCUSTOMTYPE5LOADING LCUSTOMTYPE5MEDIA LCUSTOMTYPE6MEDIA LCUSTOMTYPE5WEIGHTLCUSTOMTYPE6LENGTH LCUSTOMTYPE6LOADING Assign Type/Bin Dinquire or Envelope setting Inquire value Lenvelopetexture LenvelopeweightLfaxresolution PRINT, DONOTPRINT, Printerror Assign Type/Bin Dinquire or Glossy setting Inquire value DONOTROTATE, Rotatepaper Donotrotate Otherenvelope LjamrecoveryLimageenhancetype Limageorientation Assign Type/Bin Dinquire or Labels setting Inquire value Lmanualcolorrgbtext LletterheadweightLletterheadoutbin Lletterheadtexture Lmanualpapersize OFF, VIVID, VIVIDCMYK, USCMYK, Eurocmyk Uscmyk US ImageLmanualenvelopesize Lmanualenvelopetype LOPTIONALOUTBIN1NAME LmultipageprintLmultipageview AUTO, SHORTEDGE, Longedge Auto Lnpap LOPTIONALOUTBIN7NAME LoutbinconfigLOPTIONALOUTBIN6NAME OUTBIN6 Overflow Bin Dinquire or Setting Inquire value Assign Type/Bin Dinquire or Plain setting Inquire value Lppdslinesperinch LppdsLppdsformlines Ppds Lprintbuffer LpreprintedweightLpreprintedoutbin Lpreprintedtexture GRAPHICS, IMAGES, 1200IMAGEQ, Inksaver NORMAL, Best Lpunch LresetLprintquality QUICKPRINT, NORMAL, Presentation Normal Lstaple ON, OFF, AUTO, FRONT, BACK, DUAL, 0, 1 LstaplesemptyalarmLstandardoutbinname Lstrokewidth LTRAY1SENSEDTYPE LtransparencyweightLtransparencyoutbin Ltransparencytexture LETTERHEAD, PREPRINTED, Colored CUSTOMTYPE4 LTRAY3SENSEDTYPELETTERHEAD, PREPRINTED, Colored CUSTOMTYPE3 LTRAY4SENSEDTYPE LTRAY4PAPERTYPE LusdefaultsLTRAY2PAPERTYPE LTRAY3PAPERTYPE Common Variables for PCL Emulation Common Variables for PCL Emulation Printer Unique Variables for PCL Emulation Printer Unique Variables for PCL Emulation LASSIGNTRAY4 LASSIGNTRAY1LASSIGNTRAY2 LASSIGNTRAY3 Factory Variable Function Selections DefaultCommon Variables for PostScript Emulation Common Variables for PostScript Emulation ON, OFF Lpsfontpriority Printer Unique Variables for PostScript EmulationPrinter Unique Lresource Variables Printer Unique Variables for PostScript Emulation Printer Unique Lresource Variables Response Syntax Status Readback CommandsDinquire Command Echo Command Category Values Description Info Command10 Info Category Parameter Values Manual Feedcrlf Info Config Response Syntax An Example Inquire Command Ustatus Command Ustatus Variable Value Description Ustatusoff Command11 Ustatus Unsolicited Status Variable Values Printer State Status Code Display String Online Status Status Message FormatInformation Messages 12 PJL Information Messages 11xyy Status Printer State Code Display String Online Status Auto-Continuable Conditions13 PJL Messages for Auto-Continuable Conditions Intervention required 30018 Serial 1 Port Disabled Intervention required 30075 Scheduled Maintenance Intervention required 32002 Disk Full 14 PJL Message for Attendance Conditions Attendance Conditions Cartridge life warning Intervention required 40021 Print cartridge missing Intervention required 40022 Intervention required 40037 Stmsg Opmsg Load staples Operator Intervention Paper Handling 15 PJL Messages for Paper Handling YY Value Media Size 16 Tray Codes17 Media Size Codes Value Tray WW Value Output Bin Operator Intervention Paper Jams18 Output Bin Codes 19 PJL Messages for Paper Jams Intervention required 4232x Intervention required 4253w Intervention required 4281w Rdymsg Command Device Attendance CommandsService Errors Stmsg Command Opmsg Command Lportrotate Command Unique PJL CommandsLbeep Command Testpage Value Description Lprint Commands Information PagesLescapechar Command 20 Lprint testpage Commands PJL Character Description Lfax Phonenumber Command21 Lfax Phonenumber number Values File Commands for Flash or Disk Ldownloadtarget Command Parameter Syntax Description 22 Variables for Flash and Disk File and Password Commands MAC5 Lclosefile Command Lopenfile Command Lreadfile Command Lrunfile Command Lwritefile Command Ldefrag Command Lrenamefile CommandLdeletefile Command Lformat Command Protecting a File or Device File and Device Protection CommandsPassword Protection for a File Password for an Entire Device Unlocking a Protected File or Device Re-Locking a Protected File or Device Unlocking a Protected File or Device for the Current Job Recovering Lost Passwords Selecting PostScript Emulation PostScript Emulation Using Your Software Program Portrait Lexmark C510n PostScript 3 Emulation Printable Area Logical Page SizeLexmark C510n Lexmark X422 PostScript 3 Emulation Printable Area Lexmark Lexmark E230, E232, E234n, E330, E332n PostScript Emulation Fonts for the Lexmark If you need the Lexmark Optra S driver for Use Lexmark Optra S DriversForward compatibility Backward compatibility PostScript Emulation Fonts for the Lexmark C510n TimesNewRomanPS-BoldItalicMT Lexmark Optra S Drivers PostScript GoldSansMM NewCenturySchlbk-Roman Supplemental Operators Command Format They set PageSize Policy to Error bold fontPaper Size Support Nameofoperator Paper Sizes Supported Ignoresize Error stackoverflowErrors rangecheck, stackunderflow, typecheck Currentuniversalsize Setuniversalsize Error rangecheck, stackunderflow, typecheckPaper Tray Support Where x y are the PageSize in points Tray Selected with Tray Operators Papertray Manualfeed Setpapertray Envelope Sizes Supported Envelope Size Support 10 Literal Names Supported Envelope Tray Support 11 Envelopetray Operator Selections Byteorder Supplemental Operator SummaryAppletalktype Buildtime Currentmanualduplexmode CheckpasswordErrors stackunderflow, typecheck Currentfilenameextend Deletefile Defaulttimeouts 12 devcontrol Operator Parameters Devcontrol Devdismount 13 Unsuccessful devcontrol Parameter Error CodesErrors invalidaccess, rangecheck, typecheck Errors invalidaccess, stackunderflow, undefinedfilename Devformat Devforall Devstatus Devmount Diskonline Error typecheck Doidlefonts DiskstatusDisplayoperatormsg Doret DojamrecoveryDoprinterrors Duplexer DostartpageDosysstart Enginesync Duplexmode Fileposition Errors ioerror, stackoverflow, stackunderflow, typecheckFile Filenameforall Idlefonts FirstsideFontnonzerowinding Hardwareiomode Jobname Initializedisk Jobsource LPRB% LPRC% Jobtimeout Pagecount ManualfeedtimeoutErrors stackoverflow, undefined Newsheet Product PagesprintedPrintername Quiet PS2fontsPS3fonts Renamefile RamsizeRealformat Revision Resolution Stop Bits Data Style Flow Control Parity Errors rangecheck, stackoverflow, stackunderflow, typecheckSccbatch Setcoverpage SetdefaulttimeoutsErrors invalidaccess, rangecheck, stackunderflow, typecheck Sccinteractive Setdoidlefonts SetdojamrecoverySetdoprinterrors Errors invalidaccess, stackunderflow, typecheck Setdostartpage Setdoret Setduplexmode Errors configurationerror, stackunderflow, typecheckSetdosysstart Setfilenameextend SetenginesyncSetethernetaddress Setidlefonts Error unmatchedmarkSetfileposition Sethardwareiomode Setmanualduplexmode SetjobtimeoutError stackunderflow, typecheck Setquiet Errors invalidaccess, limitcheck, stackunderflow, typecheckSetprintername Setsccbatch SetresolutionError stackunderflow Settumble Errors stackunderflow, typecheck, invalidaccess, rangecheckSetsccinteractive Setsoftwareiomode Tumble SetuserdiskpercentSoftwareiomode Userdiskpercent WaittimeoutErrors stackoverflow, invalidaccess TonerSaver, PictureGrade, ImageEnhancement, PrintDarkness Device Parameters14 Page Device Parameters Key Type Definition PostScript Information on PageSize, see Menu item. The following values are supported Key Source InputAttributes. The allowable values are Infinite wait or no timeout Reverse Horizontal Reverse Vertical Rows ColumnsHorizontal Vertical Orientation specified by the PageSize parameter Findcolorrendering operator Setpagedevice operator Generate a configurationerror DefaultPageSizePolicy key in the DeviceRenderingInfo Power Saver menu item SlipSheetDetails Dictionary Printer. Supported values are 15 PostScript Emulation User Parameters Interpreter ParametersUser Parameters Setcolorscreen, and sethalftone are not affected HalftoneMode Integer Printer for a specific job 16 PostScript Emulation System Parameters System Parameters Same as CurInputDevice Also transmitted to the host over the communications InstalledRam Read-only Total amount of memory in bytes installed To change the values of device parameters Device Parameters PCL Ppds 17 PostScript Emulation Device Parameters PostScript Serial RS-232/RS-422menu item. Supported values are PostScript PostScript DelayedOutputClose Boolean PostScript PostScript PostScript PostScript PostScript PostScript PostScript PostScript Device Parameters for the Parameters Device %Engine% 100 Print Darkness Setting Print Darkness and Toner Saver SettingDarkness Value Print Darkness Toner Saver Setting Value Device Parameters for the IODevice Device %disk1% Device Parameters for the Parameters Device %Console%CalendarD% Device Parameters for the IODevice %flash1% LogicalSize 104 Device Parameters for the IODevice %rom% 105 Tagged Binary Active Status and Error MessagesTagged Binary Not Active USB Status Messages18 Status Message Keys and Value Descriptions Key Value Description Unsolicited Messages Handleerror SmartSwitch Switching Languages Printer Job Language Setting SmartSwitch for Different Interfaces Sniffing Flash Memory and Disk Resource Data Collection Download Target Viewing the Contents of Flash Memory and Disk Part Name Example of Directory Part Number Size Description Password Protection Rewriting the Flash Content Device Names Accessing Files with PostScript EmulationFile Naming Conventions Filename Extensions Filenames To add the .data extension automatically again, issue Initializedisk Devformat Device Search Order Device Retrieval Speed Write PerformanceJob Buffering Device Performance Retrieval Speeds Enabling Job Buffering Creating a Partition Disabling Job Buffering Recovering from a Power Loss Noise Emission Levels Airflow RequirementNoise Emission Levels Power Requirements Electrical SpecificationsPower Requirements Printer Electrical Specifications Printer Model E33x E232 State 100 120 230 Printer Model C510 X422 E230 State 100 120 230V Clearance Requirements Physical SpecificationsPrinter Physical Specifications Clearance Requirement Specifications Atmospheric Pressure Altitude SpecificationsEnvironmental Conditions 10 Time to Print the First Power On to Ready State Time PeriodPower On to Ready State Time Period Time to Print the First Printer Interfaces Setting Up the Communications Port Using Windows 95/98/Me Setting Up the Communications Port Setting Up the Communications Port Using Windows NT Interfaces Interfaces Deciding Which Interface to Use Computer to Printer Parallel Interface Parallel Connector Pin Assignments Standard Parallel ConnectorOptional Parallel Connector Signal Direction Description Parallel Connector Pin AssignmentsPin Connector GND ErrorVCC Host Logic High Computer-to-Printer Communications Using the INIT* Signal to InitializeStandard Parallel Connector Printer Side Pin Connector 1284-B Computer Ieee 1284-C Ieee 1284-A Printer Computer Side 36-Pin 25-Pin Connector 1284-C Standard Protocol Data Transfer Sequence Time Name Minimum/Maximum Fastbytes Protocol Data Transfer SequenceTypical Parallel Interface Timings Fastbytes Timing Sequence Printer-to-Computer Communication Advanced Status Parallel Mode Strobe Receiver for the Lexmark C510 Signal Descriptions AUTOFD* Receiver for the Lexmark C510 Data 1-8 Signal Driver/Receivers for the Lexmark C510 ACKNLG*, ERROR*, SLCT, PE Drivers for the Lexmark C510 Busy Driver and INIT* Receiver for the Lexmark C510 SLCTIN* Receiver for the Lexmark C510 Serial Interface Pin Signal Direction Description Using the RS-232C Serial InterfaceHow to Connect the RS-232C Serial Interface Dedicated Serial Connector Pin Assignments RS-232C DTR RTSCTS DSR To 25 Pin Cable Adapter Such as IBM 6450242 10 Voltage Level Range Serial Communication Parameters RS-232C Start and Stop Bits Data Flow Control Serial Link All Protocols with Honor DSR Off Protocol RS-232CSerial Link All Protocols with Honor DSR On DTR and DTR/DSR Protocol Timing RS-232C XON/XOFF Protocol Timing RS-232C Serial Computer Configuration Recommendations RS-232C Serial Errors RS-232C Port Compatibility Using the RS-422 Serial InterfaceHow to Connect the RS-422 Serial Interface Serial Cable Pin Assignments RS-422 Dedicated Serial Connector Pin Assignments RS-422 Voltage Level Serial Communication Parameters RS-422 Data Flow Control Protocol XON/XOFF Protocol Timing RS-422 Serial Computer Configuration Recommendations RS-422 Network Support Fax Input BufferInput Buffer Sizes in Bytes Serial Network Memory Size Parallel Buffer Size LocalTalk C510n X422 Table A-1 PCL Emulation CommandsCommand Function Size Primary Font Symbol Set Logical Operation End Raster Graphics Version B Table A-2 GL/2 Commands PCL Support PCL Support PCL Support Printer Model Variable Name C510n X422 Table B-1 Common Variables for Both Printer Languages Variable Name C510n X422 E230, E232, E234n, E330, E332n Resourcesavesize RET Timeout Username WIDEA4 Auto PJL Support PJL Support PJL Support Lpicturegrade Lplainlength PJL Support LTRAY3PAPERTYPE LTRAY4PAPERTYPE Fontnumber Fontsource Pitch Ptsize Symset LTRAY5PAPERTYPE LTRAY1RENUMBER LTYPE1FONTS LusdefaultsTable B-3 Common Variables for PCL Emulation Table B-4 Printer Unique Variables for PCL Emulation Lpicturegrade Lpsfontpriority Jamrecovery Prtpserrs AdobembtTable B-5 Common Variables for PostScript Emulation Table B-6 Printer Unique Variables for PostScript Emulation Ldescription Lrwlock Lwlock Table B-8 Status Readback CommandsTable B-7 Printer Unique Lresource Variables Table B-9 Ustatus Unsolicited Status Variables C510n Message Status Code Return String X422 Table B-10 PJL Messages for Auto-Continuable ConditionsE230, E232 E234n, E330, E332n Intervention Required 30018 Intervention Required 30076 Intervention required 32015 Table B-11 PJL Messages for Attendance Conditions Tray Size Sense Error Intervention Required 40021 Intervention Required 40027 Black Photo Dev Life Warning Intervention Required 40038 Intervention Required 40049 Stmsg message 41xxy Table B-12 PJL Messages for Paper Handling Message Status Code Table B-13 PJL Messages for Paper JamsStatus Code Return String C510n X422 C510n Message Status Code X422 PJL Support PJL Support PJL Support Table B-15 Device Attendance Messages Table B-14 Service ErrorsTable B-16 Lexmark Unique PJL Commands Command Table B-17 File and Device Protection Commands Operator Name Table C-1 Supplemental Operators PostScript Support PostScript Support Key Table C-2 Page Device Parameters SubstituteSize Type MediaColor MediaPosition PageSize Policies PolicyNotFound PolicyReport Table C-3 User Interpreter Parameters Default C510n X422 Table C-4 System Interpreter Parameters X422 Key USBA% USBB% USBC% USBD% Table C-5 Devices SupportedC510n Device X422 E230 E232 E234 E234n E330 E332n LPRA% LPRB% LPRC% LPRD% Device C510 C510n X422 E230 E232 E234 E234n E330 E332n Supported Printer Model Not Supported C510n X422 Table C-6 Device Parameters PSSmartSwitch RobustXon SerialMode StopBits Type PortLocation PSSmartSwitch Type PostScript Support PostScript Support Enabled Filtering HasNames Interpreter PortLocation Type Device Parameters for the Parameters Device %Console% Device Parameters for the Parameters Device %Engine% Device Parameters for the Parameters Device %flash1% Device Parameters for the Parameters Device %rom% Table C-7 PostScript Commands Message Keys Index See disk Index Index Index MarkVision Professional Index Index Index Comment Lcoloredlength Lnpap LTRAY1RENUMBER Slctin Index