a By inserting the AC Adapter into the AC Adapter Jack on the Expansion Unit.
a By connecting the External Connection Port (concave side) on the Expansion Unit into the USB Cradle (GENIO e accessory), and connecting the AC Adapter into the USB Cradle.
LHow to Confirm the Remaining Battery Power of the Expansion Unit
Connect the Expansion Unit to the GENIO e, turn the GENIO e ON, and tap "Start" menu and then "Settings". On the "System" tab, tap "Power". The remaining battery power is displayed at the "External Battery" item on the "Battery" tab.
L How to Connect the Expansion Unit to the GENIO e
1.Align the protrusions on the inside of both ends of the Expansion Unit with the groove at both ends of the GENIO e Place the GENIO e on top of the Expansion Unit.
2.Slide the GENIO e and insert the Cradle Connection Port on the GENIO e into the External Con- nection Port (convex side) on the Expansion Unit.
a Firmly insert the port until you hear it click into place.
The GENIO e sometimes turns ON if the PC CARD is already installed on the PC CARD Expansion Unit.
a The Cradle also can be connected.
Groove
a Follow the above procedure in reverse to remove the Expansion Unit.
NOTE
aDo not connect two Expansion Units on top of each other. Doing so might cause a malfunction.
– 3 –
