L How to Insert the PC CARD into the PC CARD Expansion Unit
Gently, yet firmly, insert the PC CARD as far as possible after making sure that the PC CARD is correctly facing the PC CARD Slot. The slot cover is folded inside.
a The GENIO e sometimes turns ON.
PC CARD Slot Cover
Top surface of card
Eject button
To remove the PC CARD, press the Eject button. The button will pop out. Press the button again until you hear a clicking sound. This will eject the PC CARD.
a The GENIO e sometimes turns ON.
L When Using the PC CARD Expansion Unit
If the PC CARD is not recognized or other trouble occurs during use of the PC CARD Expansion Unit, follow the procedure below to remedy the problem.
1.Remove the PC CARD Expansion Unit from the AC Adapter or the Cradle.
2.Remove all cards from the GENIO e and the PC CARD Expansion Unit.
3.Remove the PC CARD Expansion Unit from the GENIO e.
a Before reconnecting the PC CARD Expansion Unit to the GENIO e, wait at least five seconds. 4.Reset the GENIO e and wait for the “Today” screen to appear.
L FCC information
Product Name: Battery Expansion Unit, PC CARD Expansion Unit
Model Number(s): CEX0121B,CEX0122B
FCC Notice “Declaration of Conformity Information”
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that inter- ference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
– 4 –
