DIGITAL CLOCK RADIO | LOCATION O F CONTROLS |
OPERATION INSTRUCTION
WARNING
EXPLANATION OF GRAPHICAL SYMBOLS:
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
"WARNING: TO REDUCE THE RISK O F E L E C T R I C S H O C K , D O N O T REMOVE COVER (OR BACK) . NO
The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute an electric shock to persons.
The exclamation point within the equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
1. SET/MEMORY Knob | 10. ALARM2 Knob |
2. POWER (ON/OFF) Knob | 11. H...TIME SET...M |
3. BAND Knob | (Hour/Minute) |
4. SNOOZE Knob | /TUNING Control |
5. BUZZER/RADIO Switch | 12. SLEEP Knob |
6. PRESET (+) Knob | 13. DIMMER Knob |
7. PRESET | 14. ALARM1 Knob |
8. DISPLAY | 15. RESET Knob |
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
9. COLORS Knob | 16. VOLUME Control |
| 3 |
PRECAUTION
Follow the advice below for safe and appropriate operation.
ON PLACEMENT
•Do not use the unit in places which are extremely hot, cold, dusty, or humid.
•Place the unit on a flat and even surface.
•Do not restrict the air flow through the ventilation slots by placing the unit on soft furnishings, by covering the unit with a piece of cloth or by placing the unit on a carpet.
ON AC VOLTAGE
•Before using, check that the rated voltage of your unit matches your local voltage.
ON SAFETY
•When connecting and disconnecting the AC cord, grip the plug instead of the cord itself. Pulling the cord may damage it and create hazard.
•When you are not going to use the unit for a long period of time, disconnect the AC power cord.
FCC INFORMATION (FOR USA ONLY)
This device complies with Part 15 of FCC Rules. Operations are subject to the following two conditions:
(1)This device may not causeharmful interference, and
(2)This device must accept any interference received, including interference that may cause undesirable operations.
Should any trouble occur, disconnect the AC power cord and refer servicing to qualified personnel.
CLOCK SETTING
• The clock display and adjustment must be in radio off.
1.Connect AC power, the clock digital will indicate on screen.
• Check that the rated voltage of your unit matches your local voltage.
2. Press “SET/MEMORY” knob, the clock digital will flash.
3. Press “ H...TIME SET...M/TUNING ” knob to adjust the Hour/Minute.
•When “ 
” appears, it comes to set noontime.
4. Press “ MEMORY ” knob to store.
DIMMER FUNCTION
•Press “ DIMMER” knob to change the LCD display brightness.
•Press “ COLORS” knob to repeatly select the
2 | 4 |
