Player Controls (3)
1 2
4 3 5
1 Directional keys “,,, “
Press the key to execute the directional key function. In addition,you can use the directional keys to scroll through options on the menu to choose song while playing VCD 2.0 disc.
2 Fast forward,Reverse,Next ,Prev
Press the “ “ key down for about 2 seconds if you want to operate fast forward function during playing. You will see the signal “ x2 “ shown at right bottom corner of the screen, the screen images will move forward at 2x speed. By pressing the “ “ two or three times will increase speed to 4x and 8x respectively and four times to circle through this function. Using the same method to operate
“ “, “ “, “ “ key. Press “ “ PLAY key to restore speed to normal play. The sound will dis- appear while operating “ fast forward “ and “ re- verse “ functions. These keys are also available on the remote control.
5. Player Controls (3)
3 “ “STOP Button
Pressing the stop button will stop play, although the disc will remain in motion. Pressing the button soon after pressing stop will cause the player to pick up at the place just left off (i.e. memory play). Pressing the
. button twice will cause play to cease and the memory play function to be disabled. The button is also available on the remote control. Refer to page 25 for relevant instructions.
| After pressing the button the disc will remain in motion. If the player is | |
4 | running on battery, be aware that player is consuming battery power. | |
“ | “ PAUSE Button |
Pressing the button will pause play. If a music CD is paused, the music will temporarily stop. If a video disc is played, the screen will temporarily freeze. Pressing the “ PAUSE “button again will advance the video out- put frame by frame, one push one frame, but a music CD will be restored to normal play. During pause, pressing thebutton will immediately dis- able pause and return video and audio output to normal play.
While paused, the disc will still rotate, but as there are no contact parts, you need not worry that an extended pause will cause damage to the disc as happens with conventional magnetic music tape. However, do remember that while in pause, the player is still drawing the same amount of power as in play mode. This button is also available on the remote control. Refer to page 25 for relevant instructions.
5 “ “PLAY Button
Pressing the button will immediately play the disc installed in your DVD player. This button is also available on the remote control. Refer to page 25 for relevant instructions.
13