REMOTE CONTROL OPERATION
Battery Installation/Replacement
Remove the battery compartment cover according to the diagram below.
1. Press the ridged area to the left.
2. | At the same time, pull the battery tray out. | 1 |
|
3. | Remove the old CR2025 battery. Replace it with |
|
|
| a new CR2025 lithium battery on the tray with the |
|
|
|
|
| |
| positive side facing upward. | 2 | |
4. | Replace the cover. | ||
Note: Do not expose the battery to excessive heat.
Remote Control Functions
1 |
2 |
3 |
4 |
5 |
6 |
7 |
1.ANGLE
Press to switch the viewing angles. Note: This function only works with discs
encoded with multiple camera angles.
2.FUNCTION
Press to switch between the 16:9 and 4:3 aspect ratios.
3.SETUP
Press to enter/exit the Setup Menu.
4.REPEAT
Press to switch the repeat modes. Note: For VCD 2.0 discs, this function is
invalid when the PBC function is activated.
5.TITLE
Press to return to the title menu of a DVD disc.
6.PREVIOUS ( 
)/UP
Press to skip to the previous chapter/track. Press to navigate in the up direction when a menu is displayed on the screen.
7.FAST REWIND ( 
)/LEFT
Press repeatedly for fast reverse playback. The available speeds are 2X, 4X, 8X, 16X, and 32X.
Press to navigate in the left direction when a menu is displayed on the screen.
12
