Audiovox DT921C manual US1NG Wall Mount Adaptor

	US1NG	THE	WALL	MOUNT
	ADAPTOR
	1. Position the wall mount bracket
	on	the base.
	line up the tabs on the waIl mount
	adaptor with the holes on the
	bottom of the base (Figure 1).
	Snap the waIl mount bracket firmly
	in place.
	2. Mount the base on the wall.
	Position the base so the mounting
	studs will fit into the holes on the
	bottom of the base. Position the
	power cord to extend down the wall
	the phone is to be mounted on.
	Slide the base down on the
	mounting studs until it locks into
	place.
+	3. Connect the telephone line cord.
	The	telephone	line	cord has a
	snap-in plug at each end. Insert

one of the plugs into the jack on the bottom of the base. Insert the other end of the plug into the wall jack.

4.Plug the AC adaptor into an

electrical outlet and the DC

connector into the power jack .; located on the back of the Base Unit .

14

Figure 1

Figure 2

0-

<0-

<0-

}) I c:::> i

~

DT '21 5/15/98. 11:13 AM

-@-