Audiovox DT921C manual OUT of Range Indication, OUT of Range WHEN. Phqneis, Channel Seraching

NOISE OR\INTEf::!Fgf3~NCE-

Your AUDIOVOX DT921c cordless

telephone has auto-channel scan circuitry which will detect excess noise and change the channel of the phone to reduce it. This is done automatically.

Since the AUDIOVOX DT921 c is a fully digital phone, it does not suffer from noise associated with regular cordless phones. At times you may experience occasional "drop outs", especially at the extreme edges of the phone's range. Simply move closer to the base unit and this will disappear.

AUTOM,ATIC SECUR.!TY CODING Your AUDIOVOX DT921c phone is factory set with 16.8 million possible security codes. This unique security code allows your handset and base to recognize each other, and minimizes

+ the possibility of another cordless phone using your telephone line.

OUT OF RANGE INDICATION

If the handset is moved to a point where the base and handset can no longer communicate, the handset will make a quick series of beeps to signal Out of

Range.

If the handset is active when taken out-of-range, it will beep twice a second and enter standby mode after 25 seconds if the link is not reestablished. If the handset is brought back within range, it will automatically re-Iink.

For out-of-range in standby mode, the handset will beep once and then at 1.5 second intervals, will display "CHANNEL SERACHING" on the LCD, and scan all channels in an attempt to re-Iink with the base.

.

OUT OF RANGE WHEN. PHQNEIS

ON	:.;. '~	.'I
If you are presently	engaged	in a phone

conversation move closer to the base. If the base unit does not communicate with the handset within 25 seconds of losing contact, it will automatically

hang up.

."

OUT OF RANGE \YHE~ PHq.NE IS

OFF	.,	y	"	-,.1
.;	;	".,	,"	-c.:;~~
If the phone is OFF, the handset and
base still monitor each other to make
sure	that they can communicate. If the

handset is moved out of range, the handset will make a series of beeps,

and will	then	display	"CHANNEL		-@-
					I
SERACHING"		on t-he LCD.		At	15
second intervals the handset will scan
all channels in an attempt to reestablish
communication with the base. This
process	does	not	require	user

intervention; the handset will re-Iink with the base automatically once it is brought back within range. The unit will then be able to receive and place ---

calls.

When the base unit is unplugged from the power supply, the handset will give the "Out of Range" warning beep. Plug the base in again and this will stop.

31

CT 921 31 I S/1S/98. 11:13 AM

~