w-

Storing Memory (Spe~d) Dial

numbers;,

To program a speed dial location, do the following:

With the phone OFF, enter the telephone number you wish to store. (20 Digits Maximum).

Enter program mode by pressing PROG. The display will show the following:

Enter th~ memory location (01..20) you V:lish to store the number in. As soon as the second memory location digit is entered, the unit

+ ~ill emit a happy tone (a short series of beeps) to confirm successful programming and exit program mo,de.

If programming is unsuccessful the unit will display:

Unsuccessful programming can result from not correctly completing the programming sequence. For example, if after entering a number on the LCO and entering program mode, the OFF key were pressed instead of entering

a valid memory location, the

"PROGRAMMING INCOMPLETE"

message would appear. If this message appears, simply repeat the programming sequence.

+

24

DT '21

24

5/15/98, 11:13AM

~

Page 24
Image 24
Audiovox DT921C manual If programming is unsuccessful the unit will display, Programming Incomplete