PARTS AND FUNCTIONS
Front and Top Panel
1)Disc tray
OpenorclosetraybypushingOPEN/CLOSEbutton. Place a disc on the disc tray, label side up.
2)STANDBY indicator
When the Unit is turned on by pressing the STANDBY/ONbutton.IfyoupresstheSTANDBY / ON button on the remote control, the Unit will turn off and go into standby mode. The light will continue to illuminate.
3)Display window
Display system information.
4)OPEN/CLOSE button
Use to open and close the disc tray.
5) SKIP buttons
PressSKIP buttontogobacktopreviouschapters/ tracks.
Press SKIP button to advance to chapters / tracks. Press and hold SKIP button to begin fast scan. Four speeds are available.
Scan all available radio stations.
6) PLAY button
Press to start or resume playback
7) STOP button Stop playing a disc.
8)FUNCTION button Select the source.
9)STANDBY/ON button Turn the power on or off.
10)Remote sensor
Receive the remote control unit signals.
11)VOLUME controls
Change the loudness of the sound from the speakers connected to the Unit.
Note:
Screen saver - If no button is pressed within 2 minutes, the function will active, If you want to return the normal screen, press any button.
Rear Panel
12) | Power cord | 18) | SUBWOOFER AUDIO OUT jack |
13) | VIDEO OUT jack | 19) | DIGITAL AUDIO OUT jack |
14) | Left/Right AUDIO OUT jacks | 20) | |
15) | COMPONENT VIDEO jacks (Y, PB/CB, PR/CR) | 21) | AUDIO IN (R/L) jacks |
16) | VIDEO IN (VCR) jack | 22) | AM(MW) LOOP ANTENNA terminal |
17)FM ANTENNA jack
E - 8
8 | 4/26/2004, 12:53 PM |