Audiovox FPE1907DV owner manual Trouble Shooting Guide, Dvd

Models: FPE1907DV

1 36
Download 36 pages 61.78 Kb
Page 34
Image 34

TROUBLE SHOOTING GUIDE

SYMPTOM

CAUSE (AND REMEDY)

No power.

The remote does not function.

DVD

No sound or only a very low-level sound is heard.

Ensure the AC power cord is connected.

Turn on the unit.

Remove any obstacles between the remote and the unit.

Use the remote near the unit.

Point the remote at the remote sensor on the unit.

Replace the batteries in the remote with new ones.

Make sure that you've selected DVD mode.

The system is in pause mode. Press the PLAY button to return to normal play mode.

Fast forward or fast reverse is performed. Press the PLAY button to return to normal play mode.

Make sure that AUDIO / VIDEO output and AV IN input connections are correct.

The DTS DVD cannot be decoded to have speaker output.

This unit is too hot. Power off the unit for 30 minutes to cool down.

No picture

• The region number of the disc doesn't match the region number

 

of this unit.

The picture is not clear

Severe hum or noise is heard.

The disc does not play.

Clean the disc.

The disc is scratched.

The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.

Clean the disc.

There is no disc inside ("No Disc" appears on the screen).

Insert the disc correctly with the playback side facing down.

Clean the disc.

A non-NTSC disc has been inserted. The unit and disc region number are incompatible.

Condensation may have formed inside the unit due to a sudden change in temperature. Wait about an hour for it to clear and try again.

34

PLV31190CS1-DC_IB_ENG_AUD.pmd

34

20/04/2007, 16:52

Page 34
Image 34
Audiovox FPE1907DV owner manual Trouble Shooting Guide, Dvd