Audiovox FPE3207 Other Information, Troubleshooting, Remote Control, Video and Audio, Problem

Models: FPE3207

1 55
Download 55 pages 44.85 Kb
Page 39
Image 39
Other Information

Other Information

Troubleshooting

If, after reading these operating instructions, you have additional questions related to the use of your television, please call the services center in your local area.

Before calling service, please check the symptoms and follow suggested solutions.

Remote Control

Problem
Possible Solutions

Remote control does not operate

● The batteries could be weak. Replace the batteries.

 

● Check the orientation of the batteries.

 

● Make sure the power cord is plugged in.

 

 

 

Remote control does not

If you replaced the batteries to the remote recently, the code numbers for the video

operate other brand equipment

 

equipment may need to be reset.

 

● There may be more than one code for the equipment that you are attempting to

 

 

operate.

 

There is a possibility that this equipment can only be operated by its original remote

 

 

control.

 

 

 

Video and Audio

Problem

Possible Solutions

No picture (screen not lit), No sound

Make sure the power cord is plugged in.

Press POWER on the TV or on the remote control.

Press the input source select button to cycle through the connected video sources.

Try another channel; it could be station trouble.

Dark, poor or no picture

● Select a proper picture mode.

(Screen lit), good sound

● Adjust the brightness in the video setting.

 

● Check the antenna/cable connections.

 

 

No color/dark picture/color

● Adjust the color saturation in the video setting.

Is not correct

 

 

 

Only snow and noise appear

● Check the antenna/cable connections.

On the screen

● Try another channel; it could be station trouble.

 

 

Dotted lines or stripes

● Adjust the antenna.

 

● Move the TV away from noise sources such as cars, neon signs, or hair dryers.

 

 

Double images

● Using a highly directional outdoor antenna or a cable may solve the problem.

 

 

“Black box” on screen

● You have selected a text option in the Setup setting and no text is available. Please try

 

to turn off the Close Caption feature or select CC1 instead of Text1-4.

 

 

Good picture, no sound

● The sound may be muted. Press MUTE again to cancel.

 

● Make sure the speaker option is set to On in the Audio settings.

 

● Make sure the stereo mode is set to stereo or mono.

 

 

Audio noise

● Communication problems may occur if infrared communication equipment (e.g.,

 

infrared cordless headphones) is used near the TV. Move the infrared communication

 

equipment away from the TV until the noise is eliminated.

 

 

38

Page 39
Image 39
Audiovox FPE3207 Other Information, Troubleshooting, Remote Control, Video and Audio, Problem, Possible Solutions