Audiovox FR-560FM Functions, Function Select F Button, FM Frequency and Preset Memory Selection

FUNCTIONS

Function Select (F) Button

Pressing the Function button will allow selection of frequency channels, as well as selection of the various unit functions. Each press permits selection of the desired channel (1–14), FM mode on or off, beep tone, scan, VOX and Dual Watch functions. Pressing the Func- tion button in the FM mode will allow FM frequency and FM preset se- lection. This button also activates the Key lock feature when pressed and held for more than 2 seconds.

FM Frequency and Preset Memory Selection

The transceiver is capable of receiving radio signals in the FM band, and is also equipped with nine preset FM memory locations. The presets allow the user to choose the nine most-used FM stations and store them for quick access.

To enter the FM mode, press the function repeatedly until the FM icon blinks. Press the Up ( ) button and the FM icon becomes steady. The transceiver will receive the FM frequency displayed.

To select an FM frequency while in the FM mode, press the function button. The FM radio frequency icon will start to blink. Press the Up ( ) or Down ( ) buttons until desired frequency is reached. Once the desired frequency is reached, press the PTT button once or the Function ( F ) select button twice.

To exit the FM mode, press the Monitor (M) button and the trans- ceiver returns to the FRS mode.To recall a preset FM frequency while in the FM mode, press the Function ( F ) button repeatedly until MEM display appears. Using the Up ( ) or Down ( ) buttons, select the desired memory preset ( 1 thru 9 ).

To store an FM station press the function button until FM display flashes. Press Up ( ) or Down ( ) buttons to select desired FM station. Then press function (F) button until MEM display flashes.

-11-