VOX Selection Mode

This option enables you to have hands-free conversation. When using the internal microphone/speaker, your voice or the signal is detected and the radio transmits and receives automatically. Your voice or nearby sound is detected and the radio transmits without the need to press the PTT but- ton.

To set the radio for VOX operation:

-From GMRS/FRS standby mode, press and hold the MODE button for 2 seconds, or until the VOX icon appears on the display.

-To terminate VOX operation, press and hold the MODE button for at least 2 seconds; the VOX indication will disappear.

Button Beep (Key Tone)

This feature allows the transceiver to sound a confirmation tone whenever the following keys are pressed: Power On/Off/SCAN Button, Up/Down But- tons and MODE Button. This feature is always on.

Call Ringer Selection Mode

The transceiver provides a transmit call ring melody at the receiving unit to alert you to an incoming call.

To activate the call ringer melody:

-From GMRS/FRS standby mode, press the PTT button twice in quick succession; a call ring melody will sound at the receiving unit to alert the user to an incoming transmission, provided that unit is equipped with this capability and is set to the same channel.

Channel Scan Operation

This feature allows you to monitor all channels automatically for valid signals. While scanning, you can transmit and receive. When a signal is received, the scan is interrupted and will return to scan mode approxi- mately 5 seconds after reception is terminated.

NOTE: In addition, the scan mode will reduce the overall battery life since the battery save function is overridden.

12

128-7005

12 of 20

Page 12
Image 12
Audiovox GMRS121-2 VOX Selection Mode, Button Beep Key Tone, Call Ringer Selection Mode, Channel Scan Operation