Audiovox P-72 owner manual Detaching the Front Panel, Attaching the Front Panel

cq FRONT PANELRELEASE BUTTON

This knob is used to release the mechanism that holds the front panel to the chassis. To detach the front panel, press the button so that the left side of the panel is released. Grasp the released side and pull it off of the chassis. To re-attach the panel, position the right side of the panel in place first and then press the left side of the panel until the mechanism locks it into place.

NOTES ON USE OF FRONT PANEL

1.Make sure the front panel is right-side-up when attaching it to the chassis as it cannot be attached when up-side down.

2.Do not press very hard on the front panel when attaching it to the chassis. No more than light to moderate pressure should be needed.

3.When attaching the front panel, make sure the right side is correctly engaged before pressing the left side to lock it into position.

4.When taking the front panel with you, please use the sup- plied carrying case to protect the panel from dirt and dam- age. Make sure there is no dust or dirt on the electrical terminals or optical sensor lenses on the back of the panel as this could cause intermittent operation or other mal- functions.

DETACHING THE FRONT PANEL

Release Button

ATTACHING THE FRONT PANEL

Engage right side first

-6-