press the + or - button of the Level Control 2 to adjust the bass response as desired. The bass level will be shown on the display panel from a minimum of -9 to a maximum of +9 (0 is flat response). The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.
5TREBLE CONTROL
To adjust the treble level, first select the Treble mode by press- ing the Select button 3 so that the “TRE.” indication appears on the display panel. Within 5 seconds of choosing the Treble mode, press the + or - button of the Level Control 2 to adjust the treble response as desired. The treble level will be shown on the display panel from a minimum of -9 to a maximum of +9 (0 is flat response). The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.
6LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first select the Balance mode by pressing the Select button 3 so that the “BAL.” indi- cation appears on the display panel. Within 5 seconds of choos- ing the Balance mode, press the + or - button of the Level Con- trol 2 to adjust the balance as desired. The balance position will be shown on the display panel from “BAL.L 15” (full left) through “BAL.R 15” (full right). When the volume level between the left and right speakers is equal, “BAL. 0” will be shown on the display panel. The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.
7FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first select the Fader mode by pressing the Select button 3 so that the “FAD.” indi- cation appears on the display panel. Within 5 seconds of choos- ing the Fader mode, press the + or - button of the Level Control 2 to adjust the front-rear speaker balance as desired. The fader position will be shown on the display panel from “FAD.R 15” (full rear) through “FAD.F 15” (full front). When the level between the front and rear speakers is equal, “FAD. 0” will be shown on the display panel. The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.
8 LOUDNESS CONTOUR (LD)
When listening to music at low volume levels, this feature will boost the bass and treble ranges to compensate for the charac- teristics of human hearing. Press the button to activate this fea- ture and the indication “LD” will appear on the display panel. Pressing the button again will deactivate the feature (the “LD” indication will disappear from the display panel).
9AUDIO SETTING MEMORIES (P1/P2/P3)
Three pre-set buttons are provided on this unit to store desired audio level positions into memories which can be easily recalled. To set any of the 3 audio memories, use the following procedure:
1.Use the Select button 3 and Level control 2 to adjust the setting of the volume, treble, bass, balance and fader to the desired positions.
2.Press the Select button 3 to call any of the audio functions on the display. Within 2 seconds of pressing the Select but- ton and while the audio function is still on the display panel,
