Configuration

1.Highlight the field beside Motion Ignoring Interval in the Motion Detection Settings screen and press . A list of intervals ranging from 1 to 10 seconds to Never appears.

2.Select a Motion Ignoring Interval from the list.

Now the DVR will not log and notify motion events that occurred during the preset interval range.

Setting Up Sensitivity Levels for the Daytime Range

1.Highlight the Daytime Setup field in the Motion Detection Settings screen and

press to set up the Daytime range. The Daytime Setup Screen appears.

Figure 3-59 Daytime Setup Screen

2.Highlight the field beside Daytime and press .

3.Use the UP and DOWN arrows to set the Daytime range.

The DVR considers the remaining time range as the Nighttime.

Motion Detection Actions Tabs

Using the Actions 1 and Actions 2 tabs, you can set the DVR to react to motion detection differently for each camera. Each camera can:

be associated with another camera

trigger an Alarm-Out connector

sound the internal buzzer of the DVR

notify a number of different devices

move PTZ cameras to preset positions

and/or display a camera on a SPOT monitor

Actions 1 Tab settings

In the Motion Detection Actions 1 tab, you can choose the cameras, the Alarm-Out output connectors, and the notification actions for each camera.

Highlight the Actions 1 tab. The Motion Detection Actions 1 screen displays.

84

Page 84
Image 84
Insignia HRSD16 Setting Up Sensitivity Levels for the Daytime Range, Motion Detection Actions Tabs, Actions 1 Tab settings