Importing Saved DVR Settings | Insignia HRSD16 specs

Configuration

The screen displays the upgrade package file names that are available. The .rui extension indicates that the file is for software upgrades.

3.Select the desired file and press .

4.Highlight Install and press to install the selected software package.

5.Highlight Cancel and press to close the window without upgrading the software. You get an error message if the upgrade package file is not installed correctly on the DVR.

The system restarts automatically after completing the upgrade.

Note The Upgrade button deactivates if the hard disk drive has not been formatted, as upgrading the system requires hard disk drive space for temporary files.

Caution The USB device must be FAT16 or FAT32 format.

You can import saved DVR settings or export the current DVR settings.

Importing Saved DVR Settings

1.Connect the USB device containing the setup file .dat to the DVR.

2.Highlight Setup - Import… in the Information screen and press . The Setup Import screen appears.

Figure 3-7 Setup Import Screen

3.Select the desired setup file and press Import to import the selected settings and change the DVR settings accordingly.

4.Highlight Include Network Setup and press to toggle between On and Off. When set to Off, the network settings will not be changed.

5.Select Import and press .

Exporting Current DVR Settings

1.Connect the USB device to the DVR.

2.Highlight Setup - Export… in the Information screen and press . The Setup Export screen appears.

38

Image 38

Insignia HRSD16 manual Importing Saved DVR Settings, Exporting Current DVR Settings

Contents

HRSD8, HRSD16 Issue Date Revisions Revisions CE Compliance Explanation of Graphical SymbolsFCC Compliance Statement Weee Waste Electrical and Electronic Equipment Weee ComplianceRoHS Contents Appendix a USB Hard Disk Drive Preparation Appendix B Text-In Query Examples Figures Page Figure B-1 Query Example 135 Figures Tables Tables Overview of Contents About This Document About Cautions and Warnings Page Risk of explosion if battery is replaced by an incorrect Page Font What it represents Example Swiss721Lt BT Keys on the keyboard Press Ctrl+C Features Introduction Technical Overview Typical DVR Installation for the HRSD8/16 DVR Introduction Required Installation Tools InstallationPackage Contents Serial RS-232C port Power cord connector Connecting the Video SourceConnecting the Loop Through Video Using a Computer Monitor Connecting AudioConnecting the Monitor Using a Spot Monitor Connecting the Network Port Connecting the DVR for Remote AccessConnecting the RS-232C Port RS-232C Port RS485 Port Connecting Alarm Inputs and OutputsConnecting the RS485 Port Ground USB Ports Connecting USB PortsFactory Reset Connecting the Power Cord 13 Power Cord Connector Installation Configuration Front Panel Controls 16-Channel DVR Front Panel Controls Position Function Channel DVR Front Panel Controls Position Function Channel DVR Front Panel Controls Position Control Function Logging Setup ScreenLogin Screen Virtual Keyboard Using the Virtual KeyboardInformation Screen Upgrade Screen Upgrading the System Software Importing Saved DVR Settings Exporting Current DVR Settings Setup Export Screen Viewing the System Log Information Screen Options Action Setting Up the Date and TimeOther Options in the Information Screen Clear All Data… Setting Holidays 11 Holiday Setup Screen Storage Screen Synchronizing with a Standard Time Server Format Formatting a Device for RecordingCapacity Information Using the Information Column Storage Status Configuration Changing the Authority Levels Assigned to a Group User Setup ScreenViewing All the Users in a Group If there is a This means that Adding a Group Adding or Changing a User’s PasswordDeleting a User or an Entire Group Alarm-Out Control UpgradeSetup New Group Authority Level Assignments Action Shutdown Adding a User Options for the New User Logging Out of the DVR Network & Notification SetupShutting Down the DVR Logout Screen Setting up the Network Configuring the Network Setting Up the LAN Configuring the LAN Parameters Manually Using the Current LAN Settings Using Dhcp 25 Port Numbers Setup Screen Configuring the LAN Using Adsl 26 LAN Dhcp Setup Screen Setting Up the Modem 28 Modem Setup Screen Data Bit Dvrns SetupModem Setup Screen Options Option Action Enable Stop Bit Port Dvrns Setup Screen Options OptionActionDvrns Server Use NAT Notification Setup Configuring Mail Notification Settings Sender Configuring Notification Callback SettingsNotification Mail Setup Screen Options Option Action Recipient Modem IP AddressRetry Outside Line Call Devices Menu Configuring DevicesConfiguring the Camera Setup 34 Camera PTZ Setup Screen Adding a Camera to the PTZ List PTZ Device List Audio Setup ScreenConfiguring a PTZ Camera in the Port Setup Window Alarm-Out Screen 37 Audio Setup Screen Creating a Schedule for Alarm-Out Dwell Time Display Screen Adjusting the Transparency of the On-Screen Display Selecting the Display Sequence for the Main Monitor Adjusting the On-Screen Display MarginsSetting Up Sequences for the Display Main Monitor Adjusting the Display Dwell Time Defining the Screen Layout Remote Control Screen 43 Spot Monitor Screen Record Menu Recording SettingsRecord Screen Event Record Dwell Record Setup Screen Options Action RecycleResolution Auto Deletion Schedule Screen Scheduling Recording Times Default… Setting Recording DefaultsSettings Default Setup Screen 49 Pre-Event Setup Screen Pre-Event Screen Event Menu Event SettingsAlarm-In Screen Actions 1 Setup Screen Initial settingsSetting the DVR Actions in Response to Alarm Input Setting Alarm-Out Actions Selecting a Camera for Recording Setting Alarm-In Notifications Actions 2 Setup Screen Selecting PTZ Presets Associating Spot Monitors with Cameras Adjusting the Sensitivity of the Motion Detection Motion Detection SetupMotion Detection Settings Tab Defining the Motion Detection Area 56 Motion Detection Sensitivity Screen Changing the Number of Motion Detection Blocks Adjusting the Motion Ignoring IntervalMotion Detection Zone Setup Screen Menu Watching How the DVR Reacts to Motion Motion Detection Actions Tabs Setting Up Sensitivity Levels for the Daytime RangeActions 1 Tab settings Selecting a Camera or Cameras for Recording 60 Motion Detection Actions 1 Screen Setting Motion Detection Notifications Actions 2 Tab settings 62 PTZ Preset Screen Video Loss Screen Setting the Sensitivity for Video Loss 63 Video Loss Settings Screen 64 Video Loss Actions 1 Screen Setting Video Loss Notifications 65 Video Loss Notify Menu 67 Text-In Settings Screen Text-In Screen 68 Port Setup Screen Page 69 Text-In Actions 1 Screen Setting Text-In Notifications System Event Screen 70 Text-In Actions 2 Screen Setting an Automatic System Self-Check Schedule Setting an Automatic Recording Self-Check Schedule Setting a Disk Almost Full Notification Setting an Automatic Alarm-In CheckSetting Up Automatic Storage Check-Up Checking for Bad Sectors on the Disk Setting Up System Event Actions 74 S.M.A.R.T Setup Screen 75 System Event Actions Screen Event Status Screen 76 Event Status Screen Configuration 102 Button Document 800-00918 Rev E OperationZOOM/PTZ Button 12/07 Power LED USB Connectors Network LED Turning On the Active Cameo Mode Using PIP ModeActive Cameo Mode Exiting the Active Cameo mode Adjusting the Image Freeze ModeZoom Mode If you choose After you’ve pressed SEQUENCE, the DVR Browsing with Sequence ModeEntering the Sequence Mode Using a Mouse During Live Monitoring Exiting Sequence Mode Previous Group Right Mouse Button Menu Functions Option FunctionPIP, 2x2, 3x3 Next Group Event Monitoring Covert Camera SettingsReturning to Live Monitoring Mode Then the DVR displays Selecting the Camera to Display on a Spot Monitor Spot MonitoringViewing Images from Covert Cameras Sequence Menu Controlling the PTZ Cameras PTZ ModeEntering the PTZ Mode Positioning the PTZ Cameras Using the Front Panel Buttons Saving Camera Position Settings as Presets PTZ Toolbar Loading a PresetUsing a Mouse for Convenient PTZ Control PTZ Toolbar Tools Icons Action Panic Recording Exiting the PTZ ModeRecording Video Playing Recorded Video Recording Audio Playback Button Functions ButtonFunction Cameo Playback Button Functions Using the Mouse for PlaybackSearching Video Button Function Option Function Go to the First Search MenuSearch Menu Options Go to the Last Go to the Date/Time Calendar Search Event Log Search Narrowing Your Event Search Using Option 14 Event Log Search Screen Motion Alarm-InEvent Log Search Options Action From Event Log Search Options OptionAction Video Loss Self-Diagnostic EventsText-In Search Narrowing Your Text-In Search Using Option 16 Text-In Search Screen Text Input Device 11 Text-In Search Options Action FromChannel Name Value Motion SearchText-In Search Options Action Comp Line Zone Motion Search OptionsOption Action From Copying Video Clips Using the Clip-Copy Screen 12 Motion Search Options Option Action Sensitivity Dest Password14 Clip Copy Options Action From File name Using the DVR While Backing Up Video Naming a Video Clip File Operation USB Hard Disk Drive Preparation Preparing the USB-IDE hard disk drive in Windows Fdisk Option menu, choose 5. Change current fixed disk drive Text-In Query Examples Query Example Figure B-2 Query example Reviewing Video Clips Figure C-1 ClipPlayer Screen Option ClipPlayer Function Select from Save , Print , Info , Image Processing , Video Reviewing Video Clips 140 Time Overlap Figure D-1 Time Overlap Time Overlap 142 Troubleshooting Problem Possible Solution Troubleshooting 144 Connector Pinouts Master Unit Slave Unit Connector Pinouts 146 Map of Screens Map of Screens 148 System Log Notices System Log Notices 150 Number Description Error Code NoticesSystem Upgrade Related Clip Copy Related Inputs/Outputs SpecificationsVideo specifications General ConnectorsStorage Index Page Loading a PTZ preset 114 positioning PTZ cameras Page Page +1.800.796.CCTV North America only HVSsupport@honeywell.com