Insignia HRSD16 manual IP Address, Retry, Modem, Outside Line Call, Callback Phone Number

Configuration

Figure 3-31 Notification Callback Setup Screen

	Table 3-8	Notification Callback Setup Screen Options
Option	Action
LAN	Highlight LAN and press		to toggle between On and Off. When
	LAN is turned On, you can change the IP addresses.
IP Address	Highlight the IP Address field that you want to change and press			.
	Enter the IP address of the computer you want contacted during an
	event.

You can enter up to five IP addresses.

Retry	Highlight the field beside Retry and enter the number of times you
	would like the DVR to try contacting the computer. You can select
	from 1 to 10 retries.
Modem	If the modem was enabled in the Network screen (see Setting Up the
	Modem on page 55), you can set the DVR to contact a computer
	running RASplus. Highlight Modem and press	to toggle between

On and Off. When Modem is turned On you can enter a telephone number.

Remote Server Phone Highlight the field beside Remote Server Phone Number and use the

Numbervirtual keyboard to enter the telephone number of the computer running RASplus.

Outside Line Call	Highlight the field beside Outside Line Call and enter any numbers
	that must be dialed for an outside line for your telephone system. For
	example, you may have to dial 9 to get an outside line.
Callback Phone Number	Highlight the field beside Callback Phone Number and use the virtual
	keyboard to enter the telephone number of the DVR.
Save your Notification changes by highlighting Save and pressing		. Select Cancel
to exit the screen without saving the changes.

60