Insignia HRSD16 manual Setting Up System Event Actions, 74 S.M.A.R.T Setup Screen

Configuration

Setting up Disk S.M.A.R.T. (Self-Monitoring Analysis and Reporting Technology)

1.Highlight the Setup… field beside Disk S.M.A.R.T., and press . The S.M.A.R.T. Setup screen appears.

Figure 3-74 S.M.A.R.T Setup Screen

2.Highlight Enable and press to toggle between On and Off.

Note If Enable is turned Off, you are not be able to make changes to any of the fields.

3.Highlight the field beside Check Time and press . You can select from Monthly, Weekly, and Daily.

If you select Monthly, you are asked to set the Day of the Month and the Time. If you select Weekly, you are asked to set the Day of the Week and the Time. If you select Daily, you are asked to set the Time.

4.Highlight the first field beside Temperature Threshold and press . Use the UP and DOWN arrows to scroll through the numbers. Refer to the hard disk drive manufacturer's documentation for the correct temperature setting.

If the temperature of hard disk drive exceeds the defined threshold, the system triggers an alert.

5.Highlight the second field beside Temperature Threshold and press . Select either ºC (Celsius) or ºF (Fahrenheit), and press .

The field beside Last Check-Timedisplays the Date and Time of the last S.M.A.R.T. check.

6.Highlight OK and press to accept the changes. Select Cancel to exit the screen without saving the changes.

7.Select Save and then press to save your changes.

Setting Up System Event Actions

The DVR can be set to react to system events. System events can:

•be associated with an Alarm-Out connector

•sound the DVR internal buzzer

•notify a number of different devices.

Document 800-00918 Rev E	99
12/07