Configuration

Setting Alarm-Out Actions

You can associate Alarm-Outs with the Text Inputs. When the DVR detects text input on the selected text-in device, it triggers output signals on the associated Alarm-Out connectors. You can also have the DVR internal buzzer sound if text-input is detected.

1.Highlight the desired field under the Alarm-Outheading, and press . A list of Alarm Outputs appears.

2.Select the Alarm Output connectors that you would like to activate whenever the DVR detects text input.

Note For the Alarm-Out action, the alarm output and beep you select should be set to the Event mode in the Alarm-Out setup screen (Schedule tab).

Setting Text-In Notifications

1.Highlight the desired field under the Notify heading, and press . The Text-In Notify menu appears.

2.You can toggle the entire list On and Off by highlighting Notification and pressing .

You can toggle the individual items On and Off by highlighting them and pressing

.

3.Highlight OK and press to accept your changes.

Note For the Notify action, the notify item you select should be enabled in the Notification setup screen and the DVR should be registered in the RASplus (Remote Administration System).

Actions 2 Tab Settings

In the Alarm-In Actions 2 tab, you can choose PTZ camera preset positions and spot monitor actions.

Highlight the Actions 2 tab. The Text-In Actions 2 screen displays.

Document 800-00918 Rev E

95

12/07

 

Page 95
Image 95
Insignia HRSD16 manual Setting Alarm-Out Actions, Setting Text-In Notifications