Insignia HRSD16 manual Using PIP Mode, Turning On the Active Cameo Mode

Operation

Using PIP Mode

To display a Picture-in-Picture, press DISPLAY in the single-screen mode. You can change the location of the PIP counterclockwise and clockwise by pressing the UP and DOWN arrows. You can change the PIP size by pressing the LEFT and RIGHT arrows.

Active Cameo Mode

Turning On the Active Cameo Mode

There are two ways you can enter the Active Cameo mode:

•Press and hold CAMEO for two seconds or longer in any multi-view format.

OR

•Select Edit Group in the Mouse display menu.

A yellow outline appears around the video indicating the Active Cameo mode. To move the active cameo frame, press the arrow buttons.

Exiting the Active Cameo mode

There are two ways to exit the Active Cameo mode:

•Press (Play/Pause).

OR

•Press CAMEO again, and then select Exit Edit Group in the cameo menu. The active cameo mode remains in effect for 15 seconds if there is no further operation.

Changing the Screen Layout in Active Cameo Mode

1.Enter the Active Cameo mode.

2.Press the button for the camera you want to display in the active cameo. After setting the camera number to active cameo, the DVR moves the active cameo to the next cameo.

If...	Then...
The camera number exists on	The active cameo is changed with
the current screen	the existing camera number
The camera number does not	The active cameo is replaced by the
exist on the current screen	camera number

Document 800-00918 Rev E	105
12/07