Insignia HRSD16 manual Figure D-1 Time Overlap

Time Overlap

D

Time Overlap

If the time and date have been reset to a time that is earlier than the existing recorded video, then it is possible for the DVR to have more than one video stream in the same time range. In this case, you can search overlapping video streams individually by selecting a specific segment.

For example, when the DVR has recorded video from one to five o'clock and the user changes the time backward from five to three o'clock and then continues recording until six o'clock, there will be two video streams and segments from three to five o'clock.

Figure D-1 Time Overlap

You can search overlapping video streams by selecting a specific time or time range. If you want to search recorded video at four o'clock during the overlapping time range, you can use Go to the Date/Time. You are given a choice of overlapping time segments. Select the segment you want to search.

Figure D-2 Time Overlap Segment Selection

If you want to search recorded video from four to five o'clock during the overlapping time range using a search method such as Event Log Search, Text-In Search, or Motion Search, it is possible for the DVR to have two overlapping start and stop times. You are asked to select one of the overlapping start and stop times from the search time ranges as follows:

•From four o'clock of the first segment to five o'clock of the first segment

•From four o'clock of the first segment to five o'clock of the second segment

•From four o'clock of the second segment to five o'clock of the second segment

Figure D-3 Time Overlap Start/Stop Time Selection

Document 800-00918 Rev E	141
12/07