Insignia HRSD16 manual Channel DVR Front Panel Controls Position Function

Configuration

Table 3-1 16-Channel DVR Front Panel Controls

Position Control Function

1Camera Buttons (1 to 16) Press the individual camera buttons to display the selected camera full screen. Buttons 1 to 9 are also used to enter passwords.

		In the PTZ mode, press Camera 1 to zoom in and
		Camera 2 to zoom out. Press Camera 3 to focus near
		and Camera 4 to focus far. Press Camera 5 to move
		to the preset and Camera 6 to save the preset.
2	Clip Copy LED	The Clip Copy LED lights when the DVR is
		clip-copying.
3	Alarm Out LED	The Alarm Out LED lights when alarm output or
		internal buzzer is activated.
4	Arrow Buttons	These buttons are used to navigate through menus
		and GUI. You can also use them to change numbers
		by highlighting a number in the menu and using the
		Up and Down arrows to increase or decrease the
		number's value.
		These buttons are also used to control Pan and Tilt
		when in the PTZ mode. When in the PIP display
		format, press the Up and Down arrows to move the
		position of the small screen counter-clockwise and
		clockwise, and press the Left and Right arrows to
		change the PIP screen size.
		In the playback mode, press			to play video
		backward at high speed. Press			again to toggle the
		playback speed from		,	and	. The
		screen displays ,		and		respectively.
		Press	to play video forward at high speed. Press
		again to toggle the playback speed from					,
		and	. The screen displays ,			and
		respectively. When in the pause mode, press					to
		move to the next image and press				to move to the
		previous image.
5	PLAY/PAUSE Button	In the live monitoring mode, press				to freeze the
		current screen. The screen displays the icon. When
		in the playback mode, press			to play back images
		at regular speed or pause playing video.
		Press	to select a highlighted item or complete an
		entry that you have made during system setup.
6	DISPLAY/SPOT Button	Press DISPLAY/SPOT to toggle different display
		formats. The available formats are: PIP, 2x2, 3x3 and
		4x4.

Press and hold DISPLAY/SPOT for two seconds or longer to select which cameras display on the Spot monitor.

32