Operation
Table 4-5 PTZ Toolbar Tools
Icons Action
Exit the toolbar
Click the empty space under 
and drag the toolbar to where you want it located.
To
Exiting the PTZ Mode
Press PTZ to exit the PTZ mode.
Recording
Recording Video
After you have installed the DVR following the instructions in Chapter 2, Installation, it is ready to record. The DVR starts recording based on the settings you made in the Record setup screen. See Chapter 3, Configuration.
Recycle On The DVR records over the oldest video once the hard disk is full. The factory default is or Recycle Recycle On. Setting the DVR to Recycle Off causes it to stop recording once the hard
Off disk is full.
Standard or When set to Standard (factory default), the DVR has a maximum recording speed of 120 High ips. When set to High, the DVR has a maximum recording speed of 60 ips.
Panic Recording
Pressing PANIC starts panic recording of all cameras, and pressing the button again stops panic recording. If you set the Panic Recording Duration in the Record Screen, panic recording stops automatically according to the preset duration as long as PANIC is not pressed.
Document | 115 |
12/07 |
|
